Abstract:Abstract In this study, a novel bandpass filter (BPF) characterized by low insertion loss (IL) and the presence of two transmission zeros (TZs) based on integrated passive device (IPD) technology is introduced. The design incorporates a low‐pass filter and a high‐pass filter which both exhibit strong out‐of‐band suppression performance. The control structure for TZs is constructed by cascading the inductance and capacitance components. The TZ controlling structure primarily generates TZs at high frequencies, resulting in a further bandwidth enhancement in the stopband. The lumped circuit of the proposed BPF is first constructed, and rigorous design formulas are provided to assist in constructing the proposed design. After schematic optimization, the second step involves layout optimization and simulation based on the specific IPD process. Experimental results mounted on a printed circuit board demonstrate that the bandwidth spans from 3.3 to 4.2 GHz with an IL of only 2.0 dB at the center frequency. Additionally, this BPF achieves impressive sideband suppression, exceeding 18 dB in the 0–1.7 GHz range and 30 dB in the 9–15 GHz range. Remarkably, the BPF is exceptionally compact with only 0.5 mm × 1.0 mm (0.006 λ c × 0.012 λ c ). The proposed BPF exhibits outstanding performance with minimal IL and extensive sideband suppression at such a compact size based on the IPD technology.

A Miniaturized Filtering Power Divider With High Selectivity and Wide Stopband Based on 3D Heterogeneous Integration Technology

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

Wideband Microstrip Filtering Power Divider Designed by Direct Synthesis Technique (DST)

Novel 6‐GHz/80.8% fractional bandwidth filtering power divider with ultra‐large coupling coefficient using air‐dielectric broadside‐coupled lines

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

A novel miniaturized microstrip filtering power divider with high selectivity based on composite right/left-handed (CRLH) concept

Wideband filtering power divider based on D-CRLH resonator

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

Wide-Stopband Bandpass-Filtering Power Divider With High-Frequency Selectivity

2n-Way Wideband Filtering Power Dividers With Good Isolation Enhanced by a Modified Isolation Network

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

Miniaturized Wide-Stopband FSIW-LC Diplexer With High Selectivity and Narrow Channel Spacing

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

Design of the Filtering Power Divider With Highly-Selective Bandpass Filters

A miniaturized on‐chip BPF with low insertion loss and wide stopband based on integrated passive device technology