Abstract:In this paper, a three-way reconfigurable power divider/combiner is proposed based on novel switch element with matching network (SEMN) and reconfigurable impedance transformer network (RITN). A good matching performance and a high isolation of the SEMN with one p-i-n diode can be obtained by the parasitic inductance and reverse capacitance of the p-i-n diode involved in matching circuits. With different parameters of one p-i-n diode under forward bias and reverse bias, the reconfigurable impedance matching can be obtained by the RITN with a simple structure. By using four RITNs and nine SEMNs, the three-way reconfigurable power divider/combiner can provide seven different states in the three-path mode, the two-path mode, and the single-path mode. For verification, a 5-GHz three-way reconfigurable power divider/combiner is designed and fabricated. In the three-path mode, measured insertion losses from port 1 to transmission ports (port 2, port 3, and port 4) are less than 0.74 dB and the isolations between transmission ports are higher than 32.1 dB. In the two-path mode with three states, the measured insertion losses are less than 0.93 dB; the isolations between transmission ports, transmission ports and isolation ports, and port 1 and isolation ports are higher than 27.5, 35.1, and 30.5 dB, respectively. In the single-path mode with three states, the measured insertion losses are less than 1.13 dB; the measured isolations between transmission ports and isolation ports are higher than 28.8 dB, and the isolations between port 1 and isolation ports are higher than 28.2 dB at the design frequency.

Compact Reconfigurable Power Divider with Low Insertion Loss

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Miniaturized Ultrawideband Reconfigurable Power Divider Based on Slotline and Double-Sided Parallel-Strip Line

Reconfigurable Unequal Power Divider with a High Dividing Ratio

A Three-Way Reconfigurable Power Divider/Combiner

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A new design of compact microstrip Wilkinson power dividers

Flexible Design of a Compact Coupled-Line Power Divider

Frequency Reconfigurable Filtering Power Divider with a Single Varactor

Compact Four-Way Suspended-Stripline Power Divider With Low Loss And High Isolation

A Compact and Reconfigurable C-Band DGS-based power divider using RF MEMS Capacitive switch

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Extremely Compact Ultra-Wideband Power Divider Using Hybrid Slotline/microstrip-Line Transition

Design of Compact UWB Power Divider with One Narrow Notch-Band

A Power Divider with Tunable Power

Novel design of compact quad‐band divider using stepped impedance coupled lines

Design Method of Reconfigurable N -Way Power Divider Based on Reconfigurable Impedance Matching Network

Reconfigurable Diplexer Using Λ/2 Resonator with Hybrid Varactor-Embedded Stepped-Impedance Open-Stub and Slot

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation