Abstract:A new theory of designing dual-band power divider (PD) based on Wilkinson structure is presented in this paper. Because of the utilization of coupled lines, the proposed PD is with a high design freedom that many transmission line (TL) combinations can be used for a fixed frequency ratio k (f(2)/f(1)). Meanwhile, since the lengths of the conventional coupled lines used are extremely long, the slow-wave structure is introduced, which configuration results in a property of designable length and compact size because of the improved space efficiency. After analysing the even- and odd-mode circuits, precise design formulas are derived and further verified for the frequency ratio from 1.5 to 6.0 using NI AWR simulator under the consideration of the largest realizable TL impedance as 128 Omega. For verification, two PDs with the same centre frequency of 1.0 GHz and 4.0 GHz but different TL configurations are designed based on the proposed design theory. According to the experimental results, both fabricated PDs have good performances as expected, such as low in-band insertion loss (S-21), wide isolation, and relatively better out-of-band rejection than majority of previous studies that the maximum S-21 between the two passbands is larger than 6 dB, while previous studies are around 4 dB.

Novel design of compact quad‐band divider using stepped impedance coupled lines

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

Flexible Design of a Compact Coupled-Line Power Divider

A New Quad-Band Wilkinson Power Divider

A Novel Compact Planar Six-Way Power Divider Using Folded and Hybrid-Expanded Coupled Lines

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

A new design of compact microstrip Wilkinson power dividers

Analysis and design of a novel coupled-line wideband Wilkinson power divider

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

Compact filtering power divider with good frequency selectivity and wide stopband based on composite right‐/left‐handed transmission lines

A simple design of low-loss quad-band Wilkinson power dividers

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Design Method of Dual-Band Wilkinson Power Divider with Designable Length and High Design Freedom

Triple-Band Power Divider Design Using M-Shaped Inverters

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

Design of A Compact Wilkinson Power Divider with High Order Harmonics Suppression