Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

Triple-Band Power Divider Design Using M-Shaped Inverters

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Novel design of compact quad‐band divider using stepped impedance coupled lines

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

A Dual-Band Unequal Power Divider with Flexible Choice of Implementation

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

A new design of compact microstrip Wilkinson power dividers

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

A Broad-Band 3-Db In-Phase Divider for Millimeter-Wave Lengths

Dual-band power dividers using substrate integrated circular cavity

A New Quad-Band Wilkinson Power Divider

A Broadband Waveguide-Based Power Divider in W-band

A design of single‐ended to differential‐ended power divider for X band application

A Novel Power Divider Integrated with Siw and Dgs Technology

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines