Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

Compact Dual-Band Gysel Power Divider Based on Composite Right- and Left-Handed Transmission Lines

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

A Power Divider Based on a New Kind of Composite Right/left-Handed Transmission Line （CRLH TL） Unit

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Design of a compact rat-race coupler employing electromagnetic bandgap (EBG)-loaded and composite right/left-handed (CRLH) half-mode substrate integrated waveguides (HMSIWs)

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Dual-band Wilkinson Power Divider Based on SS-CML

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Novel design of compact quad‐band divider using stepped impedance coupled lines

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity