Abstract:A novel design methodology for asymmetric coupled line tandem couplers with arbitrary terminal real impedances and arbitrary power dividing ratio is proposed in this article. By reasonably equating the quarter-wavelength asymmetric coupled line section with multiple single quarter-wavelength transmission lines in the vicinity of the central frequency point, an equivalent branch line model of the asymmetric coupled line tandem coupler is established and analyzed. Relationships between four terminal real impedances, four image impedances, and the power dividing ratio ${r}_{{p}}$ , for satisfying conditions of the perfect isolation, perfect match of ports, and power dividing requirement simultaneously, are deduced. The simplified analysis method and design formulas for symmetric coupled line tandem couplers are also presented and verified from the simulation level. Based on the extraction of unit length resistance, inductance, conductance, and capacitance parameters from full-wave simulation S-parameters of coupled lines, procedures for quickly and accurately obtaining the initial structural parameters values are provided in detail, significantly reducing the burden of subsequent optimizations. Two tandem couplers, respectively, with power coupling degrees (dB) of 2 dB ( $r_{{p}}\approx 0.5849$ ) and 3 dB ( $r_{{p}}$ $=$ 1) were designed and fabricated. Both couplers are very compact (0.0073 $\lambda_{{g}}^{{2}}$ for 3 dB), maintain good orthogonality between the through and coupled ports, achieve the broadband property without introducing additional circuits or components, and strictly meet the expected coupling degree. The great consistency between the simulated and measured results powerfully proves the rationality of the proposed analysis theory, as well as the validity of our design methodology.

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

A Compact Microstrip Wideband Arbitrary Branch-Line Coupler with Coupled-Line Impedance-Transforming Structures

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Compact Dual-Band Gysel Power Divider Based on Composite Right- and Left-Handed Transmission Lines

A Design Approach for Asymmetric Coupled Line Tandem Couplers With Arbitrary Terminal Real Impedances and Arbitrary Power Dividing Ratio

Wideband Gysel HMSIW Power Divider with High Power-Handling Capability

A Novel Unequal Broadband Out-of-Phase Power Divider Using DSPSLs

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines