Abstract:A novel design methodology for asymmetric coupled line tandem couplers with arbitrary terminal real impedances and arbitrary power dividing ratio is proposed in this article. By reasonably equating the quarter-wavelength asymmetric coupled line section with multiple single quarter-wavelength transmission lines in the vicinity of the central frequency point, an equivalent branch line model of the asymmetric coupled line tandem coupler is established and analyzed. Relationships between four terminal real impedances, four image impedances, and the power dividing ratio ${r}_{{p}}$ , for satisfying conditions of the perfect isolation, perfect match of ports, and power dividing requirement simultaneously, are deduced. The simplified analysis method and design formulas for symmetric coupled line tandem couplers are also presented and verified from the simulation level. Based on the extraction of unit length resistance, inductance, conductance, and capacitance parameters from full-wave simulation S-parameters of coupled lines, procedures for quickly and accurately obtaining the initial structural parameters values are provided in detail, significantly reducing the burden of subsequent optimizations. Two tandem couplers, respectively, with power coupling degrees (dB) of 2 dB ( $r_{{p}}\approx 0.5849$ ) and 3 dB ( $r_{{p}}$ $=$ 1) were designed and fabricated. Both couplers are very compact (0.0073 $\lambda_{{g}}^{{2}}$ for 3 dB), maintain good orthogonality between the through and coupled ports, achieve the broadband property without introducing additional circuits or components, and strictly meet the expected coupling degree. The great consistency between the simulated and measured results powerfully proves the rationality of the proposed analysis theory, as well as the validity of our design methodology.

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Dual-band Wilkinson Power Divider Based on SS-CML

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

A Novel Unequal Broadband Out-of-Phase Power Divider Using DSPSLs

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

Miniaturized filtering equal/unequal Wilkinson power dividers

A tri-band Wilkinson power divider using extended T-shaped stubs

A Synthesis Method for N-Section Unequal Ultra-Wideband Wilkinson Power Divider With Controllable Equal-Ripple Performance

A Design Approach for Asymmetric Coupled Line Tandem Couplers With Arbitrary Terminal Real Impedances and Arbitrary Power Dividing Ratio

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line