Abstract:A new theory of designing dual-band power divider (PD) based on Wilkinson structure is presented in this paper. Because of the utilization of coupled lines, the proposed PD is with a high design freedom that many transmission line (TL) combinations can be used for a fixed frequency ratio k (f(2)/f(1)). Meanwhile, since the lengths of the conventional coupled lines used are extremely long, the slow-wave structure is introduced, which configuration results in a property of designable length and compact size because of the improved space efficiency. After analysing the even- and odd-mode circuits, precise design formulas are derived and further verified for the frequency ratio from 1.5 to 6.0 using NI AWR simulator under the consideration of the largest realizable TL impedance as 128 Omega. For verification, two PDs with the same centre frequency of 1.0 GHz and 4.0 GHz but different TL configurations are designed based on the proposed design theory. According to the experimental results, both fabricated PDs have good performances as expected, such as low in-band insertion loss (S-21), wide isolation, and relatively better out-of-band rejection than majority of previous studies that the maximum S-21 between the two passbands is larger than 6 dB, while previous studies are around 4 dB.

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

A Compact Dual-Band Coupler with Arbitrary Power Dividing Ratio Using Broadside-Coupled Microstrip

Design Method of Dual-Band Wilkinson Power Divider with Designable Length and High Design Freedom

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

Flexible Design of a Compact Coupled-Line Power Divider

Novel design of compact quad‐band divider using stepped impedance coupled lines

Dual‐band Gysel Power Dividers with Large Frequency Ratio and Unequal Power Division

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

A Dual-Band Unequal Power Divider with Flexible Choice of Implementation

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Dual-band Wilkinson Power Divider Based on SS-CML

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A New Dual-Band Wilkinson Power Divider