Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

Novel design of compact quad‐band divider using stepped impedance coupled lines

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual-band Wilkinson Power Divider Based on SS-CML

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Miniaturised dual-band rat-race coupler based on double-sided parallel stripline

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Extremely Compact Ultra-Wideband Power Divider Using Hybrid Slotline/microstrip-Line Transition