Abstract:This article presents a superconducting material based planar broadband 3-way Wilkinson power divider which can be used in the Josephson quantum voltage device for the voltage standards. The 3-way Wilkinson power divider aims to improve the integration of Josephson voltage device compared to the commonly used 2-way power divider. A two-stage λ/4 section on each branch is used to increase the bandwidth, and a π model with lumped equivalent elements are used to further decrease physical dimension in device area. Different from the conventional spatial design of N-way Wilkinson power divider, this work designs a planar broadband 3-way divider to be compatible with the on-chip fabrication process. Simulation results show that the insert loss is below 0.18 dB at working bandwidth of 16.7~23 GHz, the division imbalance of each branch is below 0.044 dB, and the input and output reflection is better than 15 and 11.9 dB, respectively. The isolation between any of the three output ports is better than 11.8 dB. All these indexes satisfy the requirement of the Josephson voltage standard application. To further prove the validity of our design, real device based on superconducting material is realized and characterized. Devices with a 3-way power divider and three 2-stacked Josephson junction arrays with 256 junctions in each array are fabricated. The experiment results indicate the potential usage of our design in quantum voltage standard devices for high-voltage output.

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Compact Reconfigurable Power Divider with Low Insertion Loss

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

An On-Chip Planar Broadband 3-Way Power Divider for Josephson Voltage Circuits

An Isolated Out-of-Phase 3-dB Power Divider via Waveguide-to-Microstrip Transition

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Three-Way Substrate-Integrated Waveguide Filtering Power Divider with In-Phase and Anti-Phase Outputs

Design of a compact Ka-band three-way power divider

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A Novel Unequal Broadband Out-of-Phase Power Divider Using DSPSLs

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure