Abstract:Optical power splitter is an essential component for photonics integrated circuits with a variety of applications such as integrated photonic modulators and single-photon detectors. This paper proposes and demonstrates a new design for a 3-dB optical power splitter with curvature optimized adiabatic taper which can achieve ultra-broadband operation, low loss, compact, and fabrication-friendly. The design incorporates a third order Bezier curve to form the adiabatic tapers, with optimized control point positions that effectively enhance waveguide coupling strength while maintaining high transmission efficiency within a compact footprint of and 200 nm minimum feature size. In consequence, simulation results reveal that the design could evenly split the input TE light over an operation bandwidth of 500 nm with an insertion loss (IL) of less than 0.493 dB across 1350 nm to 1850 nm wavelength. A 5-stage cascaded power splitter and a power splitter-based Mach-Zehnder interferometer (MZI) was fabricated for precise measuring. Experimental results demonstrate an average IL of 0.096 dB at 1550 nm, with an IL less than 0.35 dB over the entire measurement range of 1490 nm to 1640 nm. Additionally, the device has a good fabrication tolerance to variations in etching depth, waveguide width, tip width, and sidewall angle.

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

An ultra-broadband, and low loss 3-dB optical power splitter with curved adiabatic taper

Ultra-broadband 1 × 2 3 dB power splitter using a thin-film lithium niobate from 1.2 to 2 µm wave band.

Ultra-broadband 3-dB power splitter using thin-film lithium niobite from 1.2 to 2 µm waveband

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Ultra-broadband On-Chip Multimode Power Splitter with an Arbitrary Splitting Ratio

Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

Inverse Design of a Dual-Mode 3-Db Optical Power Splitter with a 445 Nm Bandwidth

Compact, Ultrabroadband and Temperature-Insensitive Arbitrary Ratio Power Splitter Based on Adiabatic Rib Waveguides

Inverse Design and Demonstration of an Ultracompact Broadband Dual-Mode 3 Db Power Splitter

Compact and Low-Loss Silicon Power Splitter Based on Inverse Tapers.

Ultra-compact dual-mode silicon power splitter using sub wavelength gratings couplers

Ultra-broadband, Compact, CMOS Compatible Arbitrary Ratio Power Splitter with Very Low Excess Loss

Inversely Designed 1 × 4 Power Splitter with Arbitrary Ratios at 2-Μm Spectral Band

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Ultra-Broadband and Low-Loss Silicon-Based Power Splitter Based on Subwavelength Grating-Assisted Multimode Interference Structure

A Compact Low-Loss Broadband Polarization Independent Silicon 50/50 Splitter

Ultracompact and Broadband Silicon-Based Polarization-Independent 1 × 2 Power Splitter Using a Shallowly Etched Multimode Interference Coupler

Extending the spectral operation of multimode and polarization-independent power splitters through subwavelength nanotechnology