Ultra Compact and Low Loss Multimode Interferenc Splitter for Arbitrary Power Splitting

Qingzhong Deng,Xinbai Li,Ruobing Chen,Zhiping Zhou

DOI: https://doi.org/10.1109/group4.2014.6961983

2014-01-01

Abstract:Arbitrary power splitting ratio is obtained by an 1-to-2 asymmetric multimode interference splitter. The dimension of the multimode section is less than 1.5μm × 3μm while the excess loss is lower than 0.15 dB.

What problem does this paper attempt to address?

Ultra Low Loss Asymmetric Multimode Interference Power Splitters

Ruixuan Chen,Qingzhong Deng,Zhiping Zhou

DOI: https://doi.org/10.1109/group4.2018.8478721

2018-01-01

Abstract:Ultra low loss arbitrary-ratio multimode interference (MMI) splitters are realized by utilizing tilted tapers with minimum excess loss predicted to be 0.05dB and the maximum no more than 0.215dB.
Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Jia Xu Brian Sia,Wanjun Wang,Xin Guo,Jin Zhou,Zecen Zhang,Mohamed Said Rouifed,Xiang Li,Zhong Liang Qiao,Chong Yang Liu,Callum Littlejohns,Graham T. Reed,Hong Wang

DOI: https://doi.org/10.1109/jphot.2019.2907788

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:We designed and demonstrated TE-mode arbitrary power splitters based on adiabatic mode evolution. The power splitters are designed with a footprint of smaller than 12 × 2.9 μm2, fabricated on a 400-nm silicon-on-insulator platform, requiring only a single etch step. The optimization process and the conditions for arbitrary-power splitting are performed using three-dimensional-FDTD simulations. We prove this concept through the fabrication of asymmetrical adiabatic evolution-based power splitters with splitting ratios of 50:50, 60:40, and 70:30. The fabricated devices are shown to agree closely with simulation results. Broadband operation with low insertion loss of 0.11–0.6 dB is demonstrated across the 3.66–3.89 μm wavelength range (230 nm). This component has applications in a multitude of areas such as spectroscopic optical sensing and optical phased arrays photonic integrated circuits etc.
Low-loss and compact, dual-mode, 3-dB power splitter combining a directional coupler, a multimode interferometer, and a Y-junction

Jing Long,Haitao Jia,jialiang zhang,Changshui Chen,Jialiang Zhang

DOI: https://doi.org/10.1364/ao.514365

IF: 1.9

2024-03-05

Applied Optics

Abstract:Jing Long, Haitao Jia, Jialiang Zhang, Changshui Chen Multimode power splitters are the fundamental building blocks in mode division multiplexing systems. In this paper, we propose a low-loss ... [Appl. Opt. 63, 2030-2035 (2024)]

optics
Ultra-broadband, Compact, CMOS Compatible Arbitrary Ratio Power Splitter with Very Low Excess Loss

Han Liao,Haiyang Huang,Yingxuan Zhao,Xiaojuan She,Rui Huang,Yang Li,Lue Tao,Zijian Zhu,Xiang Liu,Zhen Sheng,Fuwan Gan

DOI: https://doi.org/10.1117/12.2617210

2022-01-01

Abstract:We designed an ultra-broadband, compact, CMOS compatible, arbitrary ratio power splitter based on 220-nm-thick silicon-on-insulator (SOI) platform. The geometry of power splitter was digitalized into 20 parameters. For each different power splitting ratio (PSR), these 20 parameters were optimized to achieve low excess loss, using variational finite difference time domain (varFDTD) simulation and adjoint shape optimization. After many iterations of optimization, the structure was finally determined. The simulated excess loss was optimized to a low value, which was below 0.13dB. The PSR variation was limited to less than 0.459dB over 500 nm, across the O band and C band, showing that the PSR of the device was wavelength independent. An order of magnitude smaller than other kind of typical power splitters, the footprint of the proposed device is only about 1.2 μm × 2 μm, ensuring the compactness of the photonic integrated circuits (PICs). Simultaneously, it is easy to fabrication since the boundaries are smooth with a fairly large feature size.
An Ultra-Compact 3-Db Power Splitter for Three Modes Based on Pixelated Meta-Structure

Hucheng Xie,Yingjie Liu,Yuhan Wang,Yujie Wang,Yong Yao,Qinghai Song,Jiangbing Du,Zuyuan He,Ke Xu

DOI: https://doi.org/10.1109/lpt.2020.2975128

IF: 2.6

2020-01-01

IEEE Photonics Technology Letters

Abstract:An ultra-compact and efficient 3-dB power splitter for mode division multiplexing is proposed and demonstrated experimentally in this letter. The device is realized via pixelated meta-structure with a small footprint of only 4 x 4.5 mu m(2). The measured results show that the insertion losses and inter-mode crosstalk are lower than 1.5 dB and -15 dB for TE0, TE1 and TE2 modes across the wavelength band of 1530-1570 nm. The measured power imbalance between the two output ports are within 0.35 dB. The tolerances to the fabrication errors and temperature variations are also investigated. The demonstrated three-mode power splitter can directly split the mode multiplexed signals without the need of demultiplexing. Such an integrated functional element helps to significantly increase integration density of photonic integrated circuits.
Inverse Design of an Ultra-Compact 3 Db Splitter for Four Modes with Dual Polarizations

Hongzhi Jin,Zhongqiu Zhong,Yingjie Liu,Ke Xu

DOI: https://doi.org/10.1364/oecc.2021.js3e.18

2021-01-01

Abstract:An ultra-compact power splitter for TE0, TE1, TM0 and TM1 modes with a footprint of 6 × 5.25 μm2 is designed. The insertion loss is < 1 dB, and the crosstalk is < -15 dB.
Ultra-broadband On-Chip Multimode Power Splitter with an Arbitrary Splitting Ratio

Hongnan Xu,Daoxin Dai,Yaocheng Shi

DOI: https://doi.org/10.1364/osac.396024

2020-01-01

OSA Continuum

Abstract:The multimode power splitter is a basic component in mode-division multiplexing systems. In this paper, we propose an ultra-broadband silicon multimode power splitter enabling arbitrary power splitting ratios. The proposed multimode splitter is designed based on a waveguide crossing with an obliquely embedded subwavelength grating (SWG) transflector. The incident multiple guided-modes can be split into two beams with low excess losses and low crosstalk by the SWG transflector where the thin-film interference effect happens. As an example, a silicon multimode power splitter is designed to work with the three lowest-order modes of TE polarization. Any desired splitting ratio ranging from 0% to 100% can be achieved by engineering the structural parameters of the SWG. Moreover, the desired splitting ratio can be very uniform over an extremely broad bandwidth of ≥ 415 nm, covering O-, E-, S-, C-, L- and U-bands. The intermodal crosstalk is < −20 dB for all the input modes in theory. To the best of our knowledge, the proposed structure is the first multimode power splitter enabling any desired power splitting ratios in all the optical communication bands.
Ultra-broadband Dual-Polarization and Arbitrary Ratio Power Splitters Based on Bezier Curve Optimized Multimode Interference.

S. H. Zhao,S. H. A. N. G. T. O. N. G. Han,M. I. N. G. Y. U. Zhu,J. I. N. G. Y. E. Chen,Y. A. O. C. H. E. N. G. Shi

DOI: https://doi.org/10.1364/ol.485742

2023-01-01

Abstract:We propose and demonstrate two types of 1 × 2 power splitters based on multimode interference (MMI), which are ultra-compact, fabrication friendly, and low loss. The contours of MMI and output tapers are optimized with Bezier curves, which can implement arbitrary ratio power splitters (ARPSs) and ultra-broadband dual-polarization power splitters (UDPSs). For ARPSs, the experimental results show that arbitrary power splitting ratios can be obtained with an average excess loss (EL) of 0.17 dB at 1550 nm for fundamental TE polarization. For UDPSs, the experimental results show that the ELs for fundamental TE and TM polarization are less than 0.63 dB and 0.44 dB over a large bandwidth of 415 nm (1260–1675 nm). The footprints of the proposed devices are less than 10 µm × 2.5 µm (without input straight waveguide) with large fabrication tolerance.
Compact and economical MMI optical power splitter for optical communication

Huilian Ma,Jianyi Yang,Xiaoqing Jiang,Minghua Wang

DOI: https://doi.org/10.1109/icct.2000.890959

2000-01-01

Abstract:A 1×8 GaAs/GaAlAs optical power splitter based on a MultiMode Interference (MMI) coupler was presented. The input and output single mode waveguides were optimized by the Discrete Spectral Index Method (DSIM) and a moderate square spot on the output in deep-etched rib waveguides was obtained. The fabrication tolerance was analyzed by using the Finite Difference Beam Propagation Method (FDBPM). The device was fabricated by using the dry etching technique and the near-field output obtained. The device shows polarization-insensitive, large fabrication tolerance, low theoretical excess loss and low power imbalance.
An Ultra-Compact Colorless Dual-Mode 3 Db Power Splitter Based On Axisymmetrical Subwavelength Structure

Weijie Chang,Luluzi Lu,Deming Liu,Minming Zhang

DOI: https://doi.org/10.1364/cleo_at.2018.jw2a.47

2018-01-01

Abstract:A novel ultra-compact colorless dual mode power splitter using inverse design method is proposed and experimentally demonstrated with low crosstalk < 20 dB and a footprint of only 2.88 x 2.88 mu m(2), fabricated by only one-step etching.
Arbitrary-ratio 1 × 2 power splitter based on asymmetric multimode interference.

Qingzhong Deng,Lu Liu,Xinbai Li,Zhiping Zhou

DOI: https://doi.org/10.1364/OL.39.005590

IF: 3.6

2014-01-01

Optics Letters

Abstract:Free choice of splitting ratio is one of the main properties of a power splitter required in integrated photonics, but conventional multimode interference (MMI) power splitters can only obtain a few discrete ratios. This Letter presents both numerical and experimental results of an arbitrary-ratio 1 x 2 MMI power splitter, which is constructed by simply breaking the symmetry of the multimode region. In the new device, the power splitting ratio can be adjusted continuously from 100:0 to 50:50, while the dimension of the multimode section stays in the range of 1.5 x (1.8-2.8) mu m. The experimental data also indicate that the proposed arbitrary-ratio splitter keeps the original advantages of MMI devices, such as low excess loss, weak wavelength dependence, and large fabrication tolerance. (C) 2014 Optical Society of America
Arbitrary-Ratio Power Splitters Using Area Modulation Multimode Interference Couplers

Yl Sun,Xq Jiang,Jy Yang,Mh Wang

DOI: https://doi.org/10.1088/0256-307X/22/10/038

2005-01-01

Chinese Physics Letters

Abstract:We describe a novel compact power splitter with tunable power splitting ratios based on multimode interference couplers employing area modulation in a polymer. The experiments show large tuning ranges with splitting ratio varies from 6.94 to 88:12 and low heating power of 5 m W for pi phase shift.
Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Weiwei Chen,Jian Lin,Hongxiang LI,Pengjun Wang,Shixun Dai,Yuxiao Liu,Runkui Yao,Jun LI,Qiang Fu,Tingge Dai,Jianyi Yang

DOI: https://doi.org/10.1364/oe.471397

IF: 3.8

2022-01-01

Optics Express

Abstract:A design of a 1 × 2 multimode 3 dB optical power splitter using tapered couplers is proposed and investigated in this paper. As an example, a 1 × 2 splitter processing five-lowest order transverse-electric-polarized modes is designed and optimized by utilizing finite difference time domain method and particle swarm optimization algorithm. To verify the feasibility of this novel design, the optimized device is fabricated on a silicon-on-insulator platform. The coupling lengths of tapered couplers are respectively 6.5 µm, 6.0 µm, 3.5 µm, 5.0 µm, 5.0 µm, 7.5 µm, 6.0 µm, 5.0 µm, and 8.0 µm. Measurement results reveal that, for the fabricated splitter, the power uniformity varies from 0.041 to 0.88 dB, the crosstalk ranges from -23.96 to -14.12 dB, and the insertion loss changes from 0.089 to 1.50 dB within a bandwidth from 1520 to 1600 nm.
Compacted Splitter Based On The Interlaced Metallic Particle Arrays

Xian Chen,Hui Yu,Fan Wang,Qiang Zhou,Jianyi Yang,Minghua Wang,Xiaoqing Jiang

DOI: https://doi.org/10.1109/LEOSWT.2009.4771651

2009-01-01

Abstract:We propose ultra-short 1x2 and 1x3 power splitters with nanometer sized. The power splitters are designed by utilizing surface plasmon polaritons for the localization of electromagnetic energy in sub-wavelength interlaced metallic particle arrays.
Integrated Photonic Power Divider with Arbitrary Power Ratios

Ke Xu,Lu Liu,Xiang Wen,Wenzhao Sun,Nan Zhang,Ningbo Yi,Shang Sun,Shumin Xiao,Qinghai Song

DOI: https://doi.org/10.1364/ol.42.000855

IF: 3.6

2017-01-01

Optics Letters

Abstract:Integrated optical power splitters are one of the fundamental building blocks in photonic integrated circuits. Conventional multimode interferometer-based power splitters are widely used as they have reasonable footprints and are easy to fabricate. However, it is challenging to realize arbitrary split ratios, especially for multi-outputs. In this Letter, an ultra-compact power splitter with a QR code-like nanostructure is designed by a nonlinear fast search method. The highly functional structure is composed of a number of freely designed square pixels with the size of 120×120 nm which could be either dielectric or air. The light waves are scattered by a number of etched squares with optimized locations, and the scattered waves superimpose at the outputs with the desired power ratio. We demonstrate 1×2 splitters with 1:1, 1:2, and 1:3 split ratios, and a 1×3 splitter with the ratio of 1:2:1. The footprint for all the devices is only 3.6×3.6 μm. Well-controlled split ratios are measured for all the cases. The measured transmission efficiencies of all the splitters are close to 80% over 30 nm wavelength range.
Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Haoqi Chen,Runkui Yao,Pengjun Wang,Qiang Fu,Weiwei Chen,Shixun Dai,Dejun Kong,Jian Lin,Tao Jin,Jun Li,Tingge Dai,Jianyi Yang

DOI: https://doi.org/10.3788/col202422.031301

IF: 2.56

2024-01-01

Chinese Optics Letters

Abstract:A polarization-insensitive mode-order converting power splitter using a pixelated region is presented and investigated in this paper. As TE0 and TM0 modes are injected into the input port, they are converted into TE1 and TM1 modes, which evenly come out from the two output ports. The finite-difference time-domain method and direct-binary-search optimization algorithm are utilized to optimize structural parameters of the pixelated region to attain small insertion loss, low crosstalk, wide bandwidth, excellent power uniformity, polarization-insensitive property, and compact size. Experimental results reveal that the insertion loss, crosstalk, and power uniformity of the fabricated device at 1550 nm are 0.57, -19.67, and 0.094 dB in the case of TE polarization, while in the TM polarization, the relevant insertion loss, crosstalk, and power uniformity are 0.57, -19.40, and 0.11 dB. Within a wavelength range from 1520 to 1600 nm, for the fabricated device working at TE polarization, the insertion loss, crosstalk, and power uniformity are lower than 1.39, -17.64, and 0.14 dB. In the case of TM polarization, we achieved an insertion loss, crosstalk, and power uniformity less than 1.23, -17.62, and 0.14 dB.
Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

MA Hui-lian,YANG Jian-yi,LI Jin,WANG Ming-hua

DOI: https://doi.org/10.3969/j.issn.1005-8788.2000.05.010

2000-01-01

Abstract:A multi-mode interference (MMI) GaAs 1×4 optical p ower splitter that can be directly coupled with single mode fiber array was fabr icated through optimized structure design and preferential etching. The 1.3 μm He-Ne laser measurement indicated that the device has basically realized the re quirement of uniform power splitting, the power imbalance is 0.155 dB.
Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Tian Bao Yu,Qi Jie Wang,Jun Zhang,Jian Yi Yang,Siu Fung Yu

DOI: https://doi.org/10.1109/lpt.2011.2154360

IF: 2.6

2011-01-01

IEEE Photonics Technology Letters

Abstract:The properties of two-fold images, based on asymmetric interference in multimode interference-based photonic crystal waveguides, are numerically studied with finite-difference time-domain simulations. With these image properties, 2 x 2 power splitters (PSs) with an ultracompact size are designed. Arbitrary splitting ratio can be achieved by modifying the sizes (the effective refractive indices) of one pair of rods in the multimode region. As an example, a 3-dB 2 x 2 PS with a size of 24 x 8 mu m(2) is presented with an output efficiency as high as 98%. The method can be extended for the design of M x N PSs for photonic integrated circuits applications.
Ultra-Compact Broadband 2 × 2 3 Db Power Splitter Using a Subwavelength-Grating-Assisted Asymmetric Directional Coupler

Chaochao Ye,Daoxin Dai

DOI: https://doi.org/10.1109/jlt.2020.2973663

IF: 4.7

2020-01-01

Journal of Lightwave Technology

Abstract:An ultra-compact broadband 2 x 2 3 dB power splitter is proposed and demonstrated by utilizing a subwavelength- grating (SWG)-assisted asymmetric directional coupler. In the present design, a subwavelength grating is inserted into the straight coupling region of an asymmetric directional coupler, so that the refractive index and the dispersion properties of this structure are engineered for achieving an ultra-broad bandwidth and an ultra-compact footprint. For the present power splitter with a straight coupling region as short as 5.25 mu m, the bandwidth is as large as 300 nm (1400 similar to 1700 nm) for achieving an imbalance of <0.4 dB and an excess loss of <0.33 dB for the fundamental transverse electrical (TE) mode. The fabricated splitter works well with an imbalance less than 0.5 dB and with an excess loss less than 1 dB in a broad wavelength-band from 1450 to 1650 nm.

Ultra Compact and Low Loss Multimode Interferenc Splitter for Arbitrary Power Splitting

Ultra Low Loss Asymmetric Multimode Interference Power Splitters

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Low-loss and compact, dual-mode, 3-dB power splitter combining a directional coupler, a multimode interferometer, and a Y-junction

Ultra-broadband, Compact, CMOS Compatible Arbitrary Ratio Power Splitter with Very Low Excess Loss

An Ultra-Compact 3-Db Power Splitter for Three Modes Based on Pixelated Meta-Structure

Inverse Design of an Ultra-Compact 3 Db Splitter for Four Modes with Dual Polarizations

Ultra-broadband On-Chip Multimode Power Splitter with an Arbitrary Splitting Ratio

Ultra-broadband Dual-Polarization and Arbitrary Ratio Power Splitters Based on Bezier Curve Optimized Multimode Interference.

Compact and economical MMI optical power splitter for optical communication

An Ultra-Compact Colorless Dual-Mode 3 Db Power Splitter Based On Axisymmetrical Subwavelength Structure

Arbitrary-ratio 1 × 2 power splitter based on asymmetric multimode interference.

Arbitrary-Ratio Power Splitters Using Area Modulation Multimode Interference Couplers

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Compacted Splitter Based On The Interlaced Metallic Particle Arrays

Integrated Photonic Power Divider with Arbitrary Power Ratios

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Ultra-Compact Broadband 2 × 2 3 Db Power Splitter Using a Subwavelength-Grating-Assisted Asymmetric Directional Coupler