Abstract:We propose and demonstrate a high-performance asymmetrical multimode interference splitter on X-cut lithium niobate on insulator (LNOI) with an ultra-compact size of 5.8 μm × (26.4–35.6) μm. A rectangle with a small region is removed from the upper left corner of the multimode interference (MMI) coupler to achieve a variable splitting ratio. Here, we design and characterize MMIs in six different distribution ratios ranging from 50:50 to 95:5 on a 600 nm thick LNOI. Based on the cascade structure, the linear fitting method accurately shows the device loss (~0.1–0.9 dB). Our fabricated devices demonstrate robustness across a 30 nm optical bandwidth (1535–1565 nm). In addition, we numerically simulate the Z-cut LNOI, showing that the structure corresponding to the TM mode can also achieve a good variable splitting ratio.
What problem does this paper attempt to address?
The key problem that this paper attempts to solve is to design and characterize an ultra - compact asymmetric multimode interference (MMI) power splitter based on lithium niobate thin - film (LNOI) to achieve optical power distribution in any proportion. Specifically, the research aims to:
1. **Achieve optical power distribution in any proportion**: Traditional MMI splitters can only achieve equal - proportion optical power distribution. In this paper, by changing the shape of the multimode region, especially by removing the small rectangular region in the upper - left corner of the multimode interference coupler, different power distribution ratios from 50:50 to 95:5 are achieved.
2. **Reduce device size**: In order to meet the requirements of large - scale integration, an ultra - compact MMI splitter is designed in the research. The size of its multimode region is only 5.8 µm × (26.4–35.6) µm, thus reducing the impact on the overall chip area.
3. **Improve performance and reduce loss**: By optimizing design parameters, such as adjusting the length \( L_1 \) of the removed rectangle and the length \( L_m \) of the multimode region, the researchers achieved a low insertion loss (IL), ranging from 0.1 dB to 0.9 dB, and the change in power distribution ratio is less than 5% in the 1535–1565 nm wavelength range.
4. **Verify the applicability of TM mode**: Considering the birefringence effect of lithium niobate material, the researchers also simulated the TM mode in the Z - cut LNOI structure. The results show that this structure is also applicable to the TM mode, further expanding its application range.
### Formula Summary
- **Effective width \( W_e \)**:
\[
W_e = W_m+\left(\frac{\lambda_0}{\pi}\right)\left(\frac{n_c}{n_r}\right)^2\sigma\sqrt{n_r^2 - n_c^2}
\]
where \( n_r \) is the effective refractive index of the ridge, \( \lambda_0 \) is the working wavelength, \( n_c \) is the effective refractive index of the cladding, \( W_m \) is the width of the multimode waveguide, and \( \sigma \) is 0 for TE mode and 1 for TM mode.
- **Power distribution ratio (PSR)**:
\[
PSR=\frac{O_2}{O_1}
\]
where \( O_1 \) and \( O_2 \) are the output optical powers of the upper port and the lower port respectively.
- **Insertion loss (IL)**:
\[
IL = a - k
\]
where \( a \) is the actual distribution ratio and \( k \) is the slope of the fitting line.
### Conclusion
Through the above design and optimization, the researchers have successfully achieved an MMI splitter that is ultra - compact, has low loss, and has an arbitrary power distribution ratio, which provides potential application prospects for power monitoring and other functions in large - scale integrated photonic systems.