Abstract:Mode-division multiplexing (MDM) has been considered as a low-cost and high-density means for high-bandwidth on-chip optical communications in a high-performance computer and a data center. However, simultaneously controlling the power of multiple modes in the MDM systems is difficult due to the complex mode coupling for high-order modes (HOMs). Here we propose a novel schematic structure of variable-ratio mode-insensitive 1 × 2 power splitter, which is based on multimode interference (MMI) couplers cascaded with phase shifters. We theoretically reveal the phase shifting relations between the fundamental mode and the HOMs for the phase shifter formed by two unequal-width waveguides. Then, the operating principles for the proposed structure are presented. Numerical simulations are carried out and it is found that the structure has the ability to realize variable-ratio dual-mode mode-insensitive 1 × 2 power splitter by designing the number and lengths of the phase shifters, which shows a good agreement with our theoretical analysis. The structural parameters of the MMI couplers and the phase shifters are optimized to minimize the transmittance losses and the differences of mode power splitting ratio. The simulation results also show that the optimized power splitters have the advantages of high tolerance to fabrication errors and wide operating bandwidths, which indicates that the proposed structure can operate on multiple modes and would be suited to potential applications in on-chip optical communications.

Small MMI with simplified coherent coupling branches used to develop a lower footprint power splitter on SOI platform

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Compact and economical MMI optical power splitter for optical communication

A Compact SOI Polarization Beam Splitter Based on Multimode Interference Coupler

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

Compact silicon-on-insulator-based multimode interference coupler with bilevel taper structure.

Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

Ultracompact Polarization-Insensitive Power Splitter Using Subwavelength-Grating-based MMI Couplers on an SOI Platform

Inverse design of a multifunctional MMI waveguide for simultaneous wavelength demultiplexing and power splitting

Design and study of 0.85-µm wavelength-based MMI optical power splitter

The Design and Characterization of an Ultra-Compact Asymmetrical Multimode Interference Splitter on Lithium Niobate Thin Film

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Improved approach to low-loss and high-uniformity MMI devices

Variable-Ratio Mode-Insensitive 1 × 2 Power Splitter Based on MMI Couplers and Phase Shifters

The Design of 1 × 2 MMI at the MIR Wavelength of 2 Μm

One And Two-Dimensional Mmi Device With Strong Confinement Structure On Soi

A 4×4 MMI-MZ optical switch matrix on SOI based on carrier injection

Weak Guided MMI Optical Splitter

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

A Compact and Wide-Band Polarization Beam Splitter Based on Wedge-Shaped MMI Coupler in Silicon-on-insulator

Mmi Optical Couplers and Switches with Soi Technology