Abstract:This paper presented a silica-based 1 X 8 optical power splitter at 0.85 mum designed with Multi Mode Interference (MMI). The waveguide material is Si-based SiO2 doped with Ge and deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) method. The refractive index of glass substrate is 1.458, and the index difference is 0.75%. The input and output waveguides are optimized considering the characteristics of VCSEL (Vertical Cavity Surface Emitting Lasers). The core pitch on this chip is chosen as 250 mum to take the fiber connections into account, and the typical cladding diameter of optical fibers as 125 mum. The critical parameters in the fabrication of the MMI power splitter are the multimode section width and length. In general the key performance specifications of the optical power splitter are insertion loss and uniformity. We use a Finite Difference Beam Propagation Method (FDBPM) to simulate accurately the evolution of the fundamental mode power of the input guide incoming to the device, and analyze the relationships of various parameters in detail. The bend output waveguides are sin-bend styles. Compared with the commercial optical power splitter, the simulation results accord with the requirement of our design, containing compact size, low loss, stable splitting ratio, low crosstalk, large optical bandwidth, and good fabrication tolerances. The insertion loss and the uniformity of pilot study are 9.07 dB and 0.02 dB respectively.

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

GaAs 1×4 optical power splitter

<title>GaAs 1x4 optical power splitter</title>

Gaas 1 X 4 Optical Power Splitter

Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

Compact and economical MMI optical power splitter for optical communication

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Study and fabrication of multimode interference GaAs optical power splitter

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Design of MMI Double-wavelength Optical Power Splitters

Design and Fabrication of 1×8 MMI Optical Splitter on Glass

Design and study of 0.85-µm wavelength-based MMI optical power splitter

Development of GaAs 1×N and N×N MMI Optical Switch for Optical Communications

Design And Study Of Wavelength 0.85 Mu M-Based Mmi Optical Power Splitter

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Weak Guided MMI Optical Splitter

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Fabrication of glass-based multimode optical power splitters

Simulation on 0.85μm MMI Optical Power Splitter by Ion Exchange