Abstract:We design and fabricate a broadband micro polarization beam splitter on SOI (Silicon-On-Insulator) substrate which is compatible with the 180 nm COMS process. The polarization splitter is based on mismatch coupling in which a tapered directional coupler structure with slowly varying waveguide width is used. The device is fabricated in Astar-IME silicon photonics platform. When the waveguide width of the wider port of the tapered waveguide is fixed at 550 nm, by sweeping the taper waveguide length in several waveguide width of the narrower port, the polarization splitter can realize high extinction ratios of the both polarizations in a broad wavelength range. When the waveguide width of the narrow port is 410 nm, the device can split the TE and TM polarizations in a 30 mu m length with the extinction ratios of the both polarizations more than 15 dB over a wavelength range from 1500 nm to 1600 nm. The proposed polarization beam splitter is not sensitive to the fabrication error and has large tolerance. The polarization extinction ratios are still more than 10 dB in a wavelength range of 100 nm even if the waveguide width of the taper has a 50 nm fabrication error. Due to its simple structure and high performance, we believe this micro polarization beam splitter will be widely used in photonic integrated circuit, optical signal processing, and optical communication devices.

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Mode-insensitive 3-Db Power Splitter Based on Multimode-Interference Coupler

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

An ultra-broadband, and low loss 3-dB optical power splitter with curved adiabatic taper

Integrated Dual-Mode 3-Db Power Splitter Based on Multimode Interference Coupler

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Ultra-broadband On-Chip Multimode Power Splitter with an Arbitrary Splitting Ratio

Ultracompact and Broadband Silicon-Based Polarization-Independent 1 × 2 Power Splitter Using a Shallowly Etched Multimode Interference Coupler

Few-mode 3-Db Power Splitters Based on Polymer Waveguide Directional Couplers

A broadband compact 1×3 power splitter designed with inverse design method

Integrated Optical Coupler with an Arbitrary Splitting Ratio Based on a Mode Converter

Broadband dual-mode 2 x 2 3 dB multimode interference couplers with a shallowly etched multimode section

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Inverse Design of a Dual-Mode 3-Db Optical Power Splitter with a 445 Nm Bandwidth

Inverse Design and Demonstration of an Ultracompact Broadband Dual-Mode 3 Db Power Splitter

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Broadband Polarization Beam Splitter Based on A Tapered Mismatched Directional Coupler

Compact and Low-Loss Silicon Power Splitter Based on Inverse Tapers.