Abstract:Mode division multiplexing on chips can enhance optical interconnect capacity tremendously, avoiding expensive wavelength division multiplexing technology. It is a critical functionality to switch or process different mode channels together for future optical network-on-chip based on mode division multiplexing. However, controlling different modes simultaneously in the traditional wide multimode waveguide is very difficult due to very different optical properties of the modes. Here, we introduce a novel concept to realize compact multimode 3 dB couplers, which can process multiple modes of a densely-packed waveguide array bus waveguide simultaneously. A dual-mode 3 dB coupler with two input and two output bus waveguides, each of which supports two transverse electrical modes, is designed with simulated insertion losses of less than 0.23 dB and crosstalks of similar to-18.1 dB for both modes at the central wavelength. The relative phases at the two outputs are 90 degrees for both modes theoretically. The designed device has a short coupling length of 21 mu m with SiO2 cladding. The fabricated one demonstrates insertion losses of similar to 0.3 dB and similar to 0.5 dB and crosstalks of -19.6 dB and -14.1 dB for the two modes, respectively. A triple-mode 2 x 2 3 dB coupler, consisting of six coupled waveguides in the coupling region of 87 mu m length, shows average insertion losses and crosstalks for all three modes of similar to 0.25 dB and similar to-14 dB, respectively. The present design method is also extended to 3 dB couplers for more modes theoretically.

Broadband dual-mode 2 x 2 3 dB multimode interference couplers with a shallowly etched multimode section

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Integrated Dual-Mode 3-Db Power Splitter Based on Multimode Interference Coupler

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Integrated Dual-Mode 3 Db Power Coupler Based on Tapered Directional Coupler

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Multimode 3 Db Coupler Based on Symmetrically Coupled Waveguides for On-Chipbrk Mode Division Multiplexing

Design of an Ultra-Compact 3 Db MMI Coupler

Mode-insensitive 3-Db Power Splitter Based on Multimode-Interference Coupler

Ultracompact and Broadband Silicon-Based Polarization-Independent 1 × 2 Power Splitter Using a Shallowly Etched Multimode Interference Coupler

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Experimental Demonstration of a Broadband Two-Mode Multi/demultiplexer Based on Asymmetric Y-junctions

The Design of 1 × 2 MMI at the MIR Wavelength of 2 Μm

Variable-Ratio Mode-Insensitive 1 × 2 Power Splitter Based on MMI Couplers and Phase Shifters

Improved approach to low-loss and high-uniformity MMI devices

Compact silicon-on-insulator-based multimode interference coupler with bilevel taper structure.

Design of Broadband Multimode Interference (MMI) Based Couplers

Inverse Design of a Low-Loss, Compact Equal-Input 3 × 1 MMI Power Coupler

Ultra-broadband Dual-Mode 3 Db Power Splitter Based on a Y-junction Assisted with Mode Converters.