Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Design of a compact Ka-band three-way power divider

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Design of Rectangular Waveguide to Microstrip Power Dividers and Their Application As Compact Rectangular Matching Terminations

Flexible Design of a Compact Coupled-Line Power Divider

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

A Compact Dual-Band Coupler with Arbitrary Power Dividing Ratio Using Broadside-Coupled Microstrip

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Design of Low-Profile Millimeter-Wave Substrate Integrated Waveguide Power Divider/Combiner

Novel design of compact quad‐band divider using stepped impedance coupled lines

A High Efficiency D-band 32-Channel Radial Waveguide Power Divider/Combiner

Ka-band Spatial Power Dividing/combing Transition Circuit

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

A Compact Microstrip Wideband Arbitrary Branch-Line Coupler with Coupled-Line Impedance-Transforming Structures

Modified Y-junction SIW Power Divider/combiner Circuit

Implementation of three-way power divider based on substrate integrated waveguide

Broad‐band Power Divider Based on Radial Waveguide

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

A Waveguide Power Divider/combiner Using Microstrip E-plane Dual-Probe Structure