Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

W-band Power Divider Based on H-plane Slot Waveguide Bridge

A Broadband Waveguide-Based Power Divider in W-band

Ku‐band Multiway Rectangular Waveguide Power Divider

Ultra-wideband (UWB) coaxial-waveguide power divider using end-coupling structures

Novel Broadband Dual-Polarization Four-way Power Divider for Waveguide Array Antennas

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Four-way Waveguide Power Divider Design for W-band Applications

Broad‐band Power Divider Based on Radial Waveguide

Design of a compact Ka-band three-way power divider

Ultra‐wideband Power Divider Employing Coupled Line and Short‐ended Stub

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

The Design of 220GHz Four-way Power Divider Based on E-plane Directional Waveguide Hybrid

Four-way power divider/combiner based on waveguide-microstrip structure in W-band

All-Metal-Waveguide Power Divider with High Power-Combining Efficiency

Implementation of three-way power divider based on substrate integrated waveguide

Analysis and design of a novel coupled-line wideband Wilkinson power divider

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

Ultra-wideband 12-Way Coaxial Waveguide Power Divider with Rotated Electric Field Mode

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line