Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

A large-transverse-size short-pulse 4-way power divider with high fidelity

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Wideband three-way power divider with bandpass filtering response using unequal-width three-coupled line

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

Design of Compact UWB Power Divider with One Narrow Notch-Band

A wideband fully enclosed coaxial‐to‐substrate‐integrated waveguide transition and its applications in a 1‐to‐4 radial power divider

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

Uwb Power Divider With One Narrow Notch-Band And Wide Stop-Band

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

UWB 16-Way Hybrid Coaxial/Ring Cavity Power Divider with Low Insertion Loss