Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Design of super wide band 3‐way power divider/combiner

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Wideband three-way power divider with bandpass filtering response using unequal-width three-coupled line

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

A Design of Wide-Band and High-Isolation Power Divider

Design of n -Way Wideband Filtering Power Dividers With Good Port–Port Isolation

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

A Broadband 3-Way Power Divider Based on Gap Waveguide for Ka-Band Applications

2n-Way Wideband Filtering Power Dividers With Good Isolation Enhanced by a Modified Isolation Network

Wide-Stopband Bandpass-Filtering Power Divider With High-Frequency Selectivity

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Design of a compact Ka-band three-way power divider

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line