Abstract:A novel compact quasi-planar four-way power divider with a wide isolation bandwidth is proposed in this paper. The signal is fed through the coplanar waveguide and then divided to the four microstrip-line output ports through a metal via. To realize the high output isolation, the multi-layer circuit structure is used. The isolation network is composed of four isolation resistors and a metal via (common node). Equivalent circuits are given to analyze and design the novel power divider. The detailed analyses are given according to the equivalent circuits. A four-way high-isolation power divider with the center frequency of 2.1 GHz is designed and fabricated. The measured 20-dB relative isolation bandwidth between the output ports is about 58%, while 30-dB relative isolation bandwidth between the output ports is about 10%. The measured results agree well with the simulated ones. The total size of the fabricated four-way power divider is $0.17\lambda _{g} \times 0.22\lambda _{g}\,\,(\lambda _{g}$ is the wavelength of the center frequency). It shows that the proposed power divider has not only the advantages of high output isolation and compact size but also the advantages of excellent output and input impedance matching and very low insertion loss. The presented power divider can be used in antenna feed, power-combining amplifier, and so on.

A Design of Wide-Band and High-Isolation Power Divider

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

A compact ultra-wideband power divider with high isolation

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

A Broadband Waveguide-Based Power Divider in W-band

An Improved Compact Power Divider/combiner Designed Using HMSIW Structure

Design and analysis of six-channel power divider with high power and low loss

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Compact Power Divider with Improved Isolation and Bandpass Response

A compact four-way power combiner/divider in W-Band

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

Design of a V-band power amplifier/combiner based on spatial power-combining technique

Four-way power divider/combiner based on waveguide-microstrip structure in W-band

Multilayer Four-Way Power Divider with Improved Isolation Performance

Compact Quasi-Planar Four-Way Power Divider with Wide Isolation Bandwidth

An Isolated Out-of-Phase 3-dB Power Divider via Waveguide-to-Microstrip Transition

Design of Low-Profile Millimeter-Wave Substrate Integrated Waveguide Power Divider/Combiner

A Novel Millimeter-Wave Power Combining Circuit

Broadband Eight-Way Substrate Integrated Waveguide Radial Power Divider/Combiner with High-Isolation

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines