Abstract:It is extremely difficult to obtain high output power with silicon based processes, which presents one of the greatest challenges for realizing fully integrated transceivers, especially at millimeter-wave frequencies. For this reason, various power combining methods have been proposed to achieve higher power levels.In this paper, a novel power combining method suitable for millimeter-wave applications is presented. The power combining network is synthesized in package utilizing wafer level packaging technology, with an array of power sources of moderate output power capability assumed to be distributed on chip, which means applying further combining in addition to existing on-chip power combining scheme for potentially even higher output power is possible.The power combining network is composed of more basic power combining units, each consisting of one substrate integrated waveguide (SIW) resonator coupling four lambda/4 standing-wave resonators, which can be synthesized using two quarter-wavelength vertical vias with one end open and the other end shorted. For power combining purpose, the open end of each lambda/4 resonator is connected to the differential output of one on-chip power source, while the shorted end is realized using one of the two metal plates of the SIW resonator. The coupling between the SIW resonator and lambda/4 resonators is through slotting on the metal plate to allow magnetic leakage so that oscillation in lambda/4 resonators will excite the SIW resonator to oscillate. As the quality factor of the SIW resonator is much larger than those of lambda/4 resonators, energy is mainly confined in the cavity of the SIW resonator so that power combing is achieved.Example design for 60 GHz application is detailed in the paper with simulation results using commercial CST software showing the effectiveness of the power combining method.

Two-Way Current-Combining -Band Power Amplifier in 65-nm CMOS

A W-band current combined power amplifier with 14.8dBm Psat and 9.4% maximum PAE in 65nm CMOS

mm-Wave Power-Combining Architectures: Current Combining

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

A Two-Way Current-Combining W-band Power Amplifier Achieving 17.4-Dbm Output Power with 19.4% PAE in 65-Nm Bulk CMOS

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

A 24-Ghz Voltage-Combined Stacked Power Amplifier with Current-Sharing Technique in 65-Nm CMOS

A 17-dBm E-Band Power Amplifier with Two-Way Combiner in 65 nm CMOS Technology

A Two-Way Power-Combining 60ghz CMOS Power Amplifier with 22.0% PAE and 19.4dbm Psat in 65nm Bulk CMOS

A 21.56dbm Four-Way Current-Combining Power Amplifier for Ka-band Applications in 65-Nm CMOS.

A 53-to-73ghz Power Amplifier with 74.5mw/mm2 Output Power Density by 2D Differential Power Combining in 65nm CMOS

A 60-Ghz 32-Way Hybrid Power Combination Power Amplifier in 55-Nm Bulk CMOS

A Dual-Mode W-Band Eight-Way Parallel–Series Power-Combining PA with +18-Dbm Psat and 15.1% PAE in 65-Nm CMOS Technology

A 1 V, 69-73 GHz CMOS Power Amplifier Based on Improved Wilkinson Power Combiner.

A 57-64 GHz Two-Way Parallel-Combined Power Amplifier with 16.6 dBm Psat and 23.6% Peak PAE in 40nm Bulk CMOS

A35.2 Dbm CMOS RF Power Amplifier Using an 8-Way Current-Voltage Combining Transformer with Harmonic Control

A Ka-Band 23dbm Power Amplifier Based On 4-Way Parallel-Series Power Combiner With Loaded Capacitors In 65-Nm Cmos

A Ka-band Two-way Combined Power Amplifier in 65-nm CMOS Technology

A Dual-Band High-Efficiency Power Amplifier in 65-Nm CMOS Technology

A W-Band Power Amplifier Utilizing a Miniaturized Marchand Balun Combiner

A 68–79 GHZ 15.6DBM Power Amplifier in 65NM CMOS