Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

Design and analysis of six-channel power divider with high power and low loss

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Design and Measurement of a Six-Way Microwave Power Splitter with Good Phase Consistency

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

Micromachined W-band Eight-way Power Divider Based on Micro-coaxial Lines

A Design of Wide-Band and High-Isolation Power Divider

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

A Novel Power Divider Integrated with Siw and Dgs Technology

Design And Test Of 4.6 Ghz 500 Kw Continuous Wave 3 Db High Power Divider

A design of single‐ended to differential‐ended power divider for X band application

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

A 1–4 In-Phase Power Divider for 5G Wireless Communication System

A Broadband Waveguide-Based Power Divider in W-band

A compact ultra-wideband power divider with high isolation

Design of 1 ～18 GHz Ultra-wideband Power Divider

Design of a Power Divider for Millimeter Wavelength Applications

Development of a Compact X-band Variable-Ratio RF Power Splitter

An Improved Compact Power Divider/combiner Designed Using HMSIW Structure

Broadband Six-Way Out-Of-Phase Siw Power Divider