Abstract:A W-band eight-way radial-waveguide power divider with low insertion loss and high power-combining efficiency has been proposed in this paper. The coaxial waveguide has been utilized in the eight-way radial-waveguide power divider as a transition from the rectangular waveguide to radial waveguide. The structure of the coaxial mode transition from the rectangular waveguide to radial waveguide is simple, and its electrical length is much shorter than others’ mode transition, which results a low insertion loss and high power power-combining efficiency. The microwave signal was inputted from the rectangular waveguide (TE10 mode) and transmitted to the radial waveguide (cylindrical TEM mode) through the coaxial waveguide (TEM mode). Finally, the signal in radial waveguide is divided into eight ways with equal power and equal phase by the eight output standard rectangular waveguide. This all-metal waveguide multi-way power divider demonstrates the advantages of easy design and fabrication, large and arbitrary number of combination ports, and a simple and compact structure. To verify the presented power divider, a W-band eight-way power divider is fabricated and measured. The measured results show that, over the frequency range from 82 to 110 GHz, the measured input return loss is greater than 15 dB, the measured average insertion loss is about 9.4 ± 0.5 dB, the phase imbalance is about ± 5°, and the power-combining efficiency is about 91%.

6–18GHz sixteen-way ring-cavity power divider using symmetrically coaxial taper excitation

UWB 16-Way Hybrid Coaxial/Ring Cavity Power Divider with Low Insertion Loss

Ultra-wideband (UWB) Eight-Way Ring-Cavity Power Divider

Compact U-band 32-way ring-cavity spatial power combiner with low insertion loss

Compact Quasi-Planar Broadband Rectangular Ring-Cavity Power Divider Using Inserted Ground Waveguide Probe

A compact four-way power combiner/divider in W-Band

Four-way power divider/combiner based on waveguide-microstrip structure in W-band

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

W-band Low-Loss Eight-way Radial-Waveguide Power Divider Based on Coaxial Mode Transition

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

All-Metal-Waveguide Power Divider with High Power-Combining Efficiency

Design of High-Power Arbitrary Multi-Way Radial Power Dividers Using Periodic Matching Structure

A MICROSTRIP PROBE COAXIAL WAVEGUIDE POWER DIVIDER/COMBINER

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

Ka-band Spatial Power Dividing/combing Transition Circuit

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Design and Measurement of a Six-Way Microwave Power Splitter with Good Phase Consistency

Micromachined W-band Eight-way Power Divider Based on Micro-coaxial Lines

Broad‐band Power Divider Based on Radial Waveguide

A large-transverse-size short-pulse 4-way power divider with high fidelity

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines