Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

Ka-band Spatial Power Dividing/combing Transition Circuit

A Novel Compact Four-Way Power Combiner with an Embedded Microstrip-to-Waveguide Transition for Ka-band Power Amplifiers

Waveguide-Based Meniscus Thin Lens For Broadband Mm-Wave Power Combining Applications

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Waveguide Power Divider/combiner Using Microstrip E-plane Dual-Probe Structure

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

Extremely Compact Ultra-Wideband Power Divider Using Hybrid Slotline/microstrip-Line Transition

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Design of a compact Ka-band three-way power divider

A new compact Ka-band spatial power combining architecture

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

A wideband fully enclosed coaxial‐to‐substrate‐integrated waveguide transition and its applications in a 1‐to‐4 radial power divider

6–18GHz sixteen-way ring-cavity power divider using symmetrically coaxial taper excitation

Hybrid Coaxial/Substrate Integrated Waveguide Eight-Way Power Divider

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A Multi-Octave Millimeter-Wave Power Combiner Using Rectangular Coaxial Transmission Line

Design of a V-band power amplifier/combiner based on spatial power-combining technique

Novel millimeter wave power-combining system in 3-D packaging level