Abstract:A compact broadband combiner with a high power capacity and a low insertion loss, which is especially useful for solid-state power sources where multi-way power synthesis is needed, was designed and experimentally investigated. The combiner could combine the microwave signals of sixteen terminals into a single one and was based on a radial-line waveguide whose circumferential symmetry benefited the amplitude and phase consistency of the combiner. Simulation and experimental results showed that the prototype device, designed for S-band applications, exhibited a reflection coefficient S1,1 < ‚ąí20 dB in the range of 2.06‚Äď2.93 GHz, which corresponds to a relative bandwidth of approximately 34.6%. At 2.45 GHz, the phase imbalance was ¬Ī4.5¬į and the 16-way transmission coefficient was concentrated around ‚ąí12.0~‚ąí12.3 dB. The insertion loss of the device at ambient and elevated temperatures was simulated and experimentally verified, which is of importance for the design of similar high-power microwave combiners. High-power tests proved that even without enforced wind or liquid cooling, the device can handle continuous power (CW) of at least 3.9 kW, which can be much enhanced by taking regular cooling measures. The combined features of the designed combiner suggest promising applications for power synthesis in high-power, solid-state RF sources.

Design of a Compact Variable Waveguide RF Power Splitter for High-Power Applications

DESIGN OF A COMPACT VARIABLE X-BAND RF POWER SPLITTER

Development of a Compact X-band Variable-Ratio RF Power Splitter

Design of a Variable X-band RF Power Splitter

W-band Power Divider Based on H-plane Slot Waveguide Bridge

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Design and analysis of six-channel power divider with high power and low loss

Design of a compact Ka-band three-way power divider

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Design of a Compact Multimode Interference Power Splitter Based on Deeply-etched SiO2 Ridge Waveguide

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

High-efficiency Tunable T-shaped Beam Splitter Based on One-Way Waveguide

Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

An ultra-broadband, and low loss 3-dB optical power splitter with curved adiabatic taper

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

A Compact Broadband Power Combiner for High-Power, Continuous-Wave Applications