Abstract:Abstract The design and implementation of planar multi-way differential power dividers remain a challenge in terms of the compactness and especially, for the achievable characteristic impedance of the quarter-wavelength transformer when considering large number of outputs. In this work, the double-sided parallel stripline is recommended to realize such a power divider with out-of-phase outputs, and explicit design methods are provided. The proposed multi-way power divider was developed without the use of lump elements on a single substrate. For system applications, a prototype operating at 41.6 MHz with 12 pairs of out-of-phase outputs that utilize the microstrip line as the output interfaces was fabricated and examined. At the center frequency of 41.6MHz, the developed prototype measured insertion losses akin to 14.3 dB as compared with the theoretical data of 13.8 dB. The attainable impedance bandwidth ranges from 10 MHz to 80 MHz under a magnitude imbalance of ±0.3 dB. The isolations of the adjacent outputs are about 13.1 dB as compared with the theoretical values of 14.428 dB, and are better than 34 dB for more distant ones. Parameter measurements are in good agreement with the numerical predications, thus demonstrating the realization of the proposed multi-way power divider.

A Fully Differential Ultra-Compact and High Isolation Transformer-Based Wilkinson Power Divider

A new design of compact microstrip Wilkinson power dividers

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Compact Dual-Band Five-Way Wilkinson Power Divider

Multi-way Differential Power Divider with Microstrip Output Interfaces

Novel Wilkinson Power Divider with Uniform Impedance Line

A New Quad-Band Wilkinson Power Divider

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

Ultra-Compact Wideband Dual-Mode Wilkinson Power Divider Based On Thin Film Integrated Passive Device Fabrication Technology

Compact Ultra-Wideband Wilkinson Power Divider in Parallel Stripline with Modified Isolation Branches

A compact ultra-wideband power divider with high isolation

Design of A Compact Wilkinson Power Divider with High Order Harmonics Suppression

A Compact Ultra-Wideband Power Divider with Favorable Selectivity Using Transversal Filtering Transformer

Analysis and design of a novel coupled-line wideband Wilkinson power divider

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections

A design of single‐ended to differential‐ended power divider for X band application

A New Compact Three-Way Wilkinson Power Divider Based on LTCC Technology

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology