Abstract:In this paper, we present a novel dual-band out-of-phase power divider with high power-handling capability. The proposed device consists of five ports including one input port, two output ports, and two extra ones, which are connected by the external isolation resistors. To obtain the out-of-phase feature between the two output ports, double-sided parallel-strip lines are employed, and a conductor plane is inserted in the middle of the substrate as a common ground. A set of closed-form design equations is developed for analysis of the novel design structure by using the rigorous even-and odd-mode analysis method. The analysis shows that the proposed power divider can operate at two frequencies of f(1) and mf(1) with a wide frequency ratio range at 1.62 < m < 3. Furthermore, the power operation analysis also illustrates that the new circuit is superior in high power-handling capability over the conventional dividers with internal isolation resistors. For verification, an example power divider with frequency ratios of 2.4:1 is implemented. Simulation and experimental results agree well, validating the proposed design methodology.

Compact Dual-Band Five-Way Wilkinson Power Divider

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

Dual-band Wilkinson Power Divider Based on SS-CML

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

A Fully Differential Ultra-Compact and High Isolation Transformer-Based Wilkinson Power Divider

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Compact Dual-Band Gysel Power Divider Based on Composite Right- and Left-Handed Transmission Lines

A tri-band Wilkinson power divider using extended T-shaped stubs