Abstract:This article presents a superconducting material based planar broadband 3-way Wilkinson power divider which can be used in the Josephson quantum voltage device for the voltage standards. The 3-way Wilkinson power divider aims to improve the integration of Josephson voltage device compared to the commonly used 2-way power divider. A two-stage λ/4 section on each branch is used to increase the bandwidth, and a π model with lumped equivalent elements are used to further decrease physical dimension in device area. Different from the conventional spatial design of N-way Wilkinson power divider, this work designs a planar broadband 3-way divider to be compatible with the on-chip fabrication process. Simulation results show that the insert loss is below 0.18 dB at working bandwidth of 16.7~23 GHz, the division imbalance of each branch is below 0.044 dB, and the input and output reflection is better than 15 and 11.9 dB, respectively. The isolation between any of the three output ports is better than 11.8 dB. All these indexes satisfy the requirement of the Josephson voltage standard application. To further prove the validity of our design, real device based on superconducting material is realized and characterized. Devices with a 3-way power divider and three 2-stacked Josephson junction arrays with 256 junctions in each array are fabricated. The experiment results indicate the potential usage of our design in quantum voltage standard devices for high-voltage output.

A New Compact Three-Way Wilkinson Power Divider Based on LTCC Technology

Design of LTCC Wilkinson power divider for microwave modules

A new design of compact microstrip Wilkinson power dividers

The Design and Miniaturization of 6-15 GHz Lumped-Element Wilkinson Power Divider Based on GaAs IPD Technology

Ultra-Compact Wideband Dual-Mode Wilkinson Power Divider Based On Thin Film Integrated Passive Device Fabrication Technology

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

A tri-band Wilkinson power divider using extended T-shaped stubs

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

An On-Chip Planar Broadband 3-Way Power Divider for Josephson Voltage Circuits

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Compact Power Divider with Improved Isolation and Bandpass Response

Compact Dual-Band Five-Way Wilkinson Power Divider

Dual-band Wilkinson Power Divider Based on SS-CML

Miniaturized Microstrip Wilkinson Power Divider with EBG Structure

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

A New Quad-Band Wilkinson Power Divider

Design and Implementation of a New Five-Way Power Divider.

Design and Implementation of Compact Tri- and Quad-Band SIW Power Divider Using Modified Circular Complementary Split-Ring Resonators