Abstract:Abstract The design and implementation of planar multi-way differential power dividers remain a challenge in terms of the compactness and especially, for the achievable characteristic impedance of the quarter-wavelength transformer when considering large number of outputs. In this work, the double-sided parallel stripline is recommended to realize such a power divider with out-of-phase outputs, and explicit design methods are provided. The proposed multi-way power divider was developed without the use of lump elements on a single substrate. For system applications, a prototype operating at 41.6 MHz with 12 pairs of out-of-phase outputs that utilize the microstrip line as the output interfaces was fabricated and examined. At the center frequency of 41.6MHz, the developed prototype measured insertion losses akin to 14.3 dB as compared with the theoretical data of 13.8 dB. The attainable impedance bandwidth ranges from 10 MHz to 80 MHz under a magnitude imbalance of ±0.3 dB. The isolations of the adjacent outputs are about 13.1 dB as compared with the theoretical values of 14.428 dB, and are better than 34 dB for more distant ones. Parameter measurements are in good agreement with the numerical predications, thus demonstrating the realization of the proposed multi-way power divider.

Design and Implementation of a New Five-Way Power Divider.

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Novel Design of Dual-Band Unequal Wilkinson Power Divider

Multilayer Four-Way Power Divider with Improved Isolation Performance

A new design of compact microstrip Wilkinson power dividers

Compact Dual-Band Five-Way Wilkinson Power Divider

Substrate Integrated Waveguide Radial Sixteen-Way Power Divider

Microstrip/Slotline-Coupling Substrate Integrated Waveguide Power Divider with High Output Isolation

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

Multi-way Differential Power Divider with Microstrip Output Interfaces

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Compact Power Divider with Improved Isolation and Bandpass Response

Novel Subterahertz High Isolation Stacked-SIW Power Divider

Design of a Wideband Filtering Power Divider with Good In‐band and Out‐of‐band Isolations

Hybrid Microstrip/siw Power Divider with Improved Output Isolation

Four-way Hybrid SIW/microstrip-line Power Divider with Improved Output Isolation

A Four-Way Half-Mode SIW Power Divider with Improved Impedance Match