Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Four-way Hybrid SIW/microstrip-line Power Divider with Improved Output Isolation

Hybrid Microstrip/siw Power Divider with Improved Output Isolation

Microstrip/Slotline-Coupling Substrate Integrated Waveguide Power Divider with High Output Isolation

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

Multilayer Four-Way Power Divider with Improved Isolation Performance

Novel Four-Way Slotted-Substrate Integrated Waveguide Power Divider Using Identical Coupling Circuits

Compact Four-Way Suspended-Stripline Power Divider With Low Loss And High Isolation

Compact Quasi-Planar Four-Way Power Divider with Wide Isolation Bandwidth

Broadband Eight-Way Substrate Integrated Waveguide Radial Power Divider/Combiner with High-Isolation

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Four-Way Chained Quasi-Planar Slotted-HMSIW Power Divider

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

Wideband Four-Way Out-of-Phase Slotline Power Dividers

Wideband Half-Mode SIW Power Divider With Improved Output Isolation Using Slotline Isolation Technology

Substrate Integrated Waveguide Radial Sixteen-Way Power Divider

Hybrid Coaxial/Substrate Integrated Waveguide Eight-Way Power Divider

Modified Y-junction SIW Power Divider/combiner Circuit

W-band Longitudinal-Slot Coupling Four-Way SIW Power Combiner/divider

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Broadband Eight-Way Differential SIW Power Divider with Bandpass-Filtering Response Using Novel Hybrid Multiple-via Probe and Multiple Radial Slots.