Abstract:In this paper, modified π-shaped resonator composed of both microstrip transmission lines and lumped elements are employed to design a Wilkinson power divider. Utilizing these resonators leads to designing a compact divider featuring a selectable operating frequency with optional power division ratio and very wide-range harmonic suppression. To vary the operating frequency and the power division ratio, the values of just the utilized lumped elements are changed without manipulating the dimensions of microstrip lines. As a design sample, a miniaturized divider capable of operating at four frequencies i.e., 0.5, 1.0, 1.5 and 2 GHz with optional equal or unequal power division and harmonic suppression ability at each of these frequencies is designed and simulated. Finally, as a feasible sample, another Wilkinson power divider which can optionally operate at 700 MHz with equal power division or 1.2 GHz with unequal power division is designed and implemented. Based on the measurement results, the spurious harmonics from 2nd to 25th in the 700 MHz-divider and 2nd to 15th in the 1.2 GHz-divider are suppressed. Moreover, almost 96% and 93% size reduction at 700 MHz and 1.2 GHz, respectively, are achieved. The S21 and S31of the unequal divider are − 8.8 and − 3.73 dB, which indicate an unequal 3.2:1 power division.

Miniaturized Microstrip Wilkinson Power Divider with EBG Structure

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A wideband EBG structure with 1D compact microstrip resonant cell

Closed-Form Design of Wilkinson Power Divider with Broadband Harmonic Suppression and Size Reduction

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

Dual-band Wilkinson Power Divider Based on SS-CML

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Compact Ultra-Wideband Wilkinson Power Divider in Parallel Stripline with Modified Isolation Branches

A tri-band Wilkinson power divider using extended T-shaped stubs

Miniaturized filtering equal/unequal Wilkinson power dividers

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Extremely Compact Ultra-Wideband Power Divider Using Hybrid Slotline/microstrip-Line Transition

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Design of Compact UWB Power Divider with One Narrow Notch-Band

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Uwb Power Divider With One Narrow Notch-Band And Wide Stop-Band

A Fully Differential Ultra-Compact and High Isolation Transformer-Based Wilkinson Power Divider

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)