Abstract:Conventional Wilkinson power dividers (WPDs) perform satisfactorily near the intended operation frequency. Nonetheless, these WPDs demonstrate subpar performance in the stopband and necessitate a significant physical space. To enhance the existing level of advancement and in order to improve on the current state-of-the-art, a modified WPD is designed and fabricated, demonstrating a significant improvement in stopband and superior isolation between output ports. To improve the stopband and suppress unwanted harmonics, a low-pass filter (LPF) structure is placed in the both branches of the conventional WPD. The proposed modified WPD depicts a wide stopband bandwidth ( f SB > 17.25 GHz) from 2.75 to over 20 GHz with an attenuation level of 20 dB, suppressing 2nd to 11th harmonics According to measured results, the input return loss (|S 11 |), insertion loss (|S 21 |) and output isolation (|S 32 |) at f = 1.8 GHz are better than 33 dB, 3.2 dB and 21 dB, respectively. Indeed, the proposed modified WPD exhibits a magnitude imbalance of 0.00018, a phase imbalance of 1.25 degrees and a group delay of 0.5 ns. The proposed WPD depicts a compact size of 35 mm × 25 mm (0.38 λg × 0.27 λg), where λg is the guided wavelength at f = 1.8 GHz. There is a good agreement between the simulated and measured results. According to the obtained results, the proposed modified WPD shows a desirable performance for modern LTE and GSM communication applications.

Closed-Form Design of Wilkinson Power Divider with Broadband Harmonic Suppression and Size Reduction

A tri-band Wilkinson power divider using extended T-shaped stubs

Novel Design of Dual-Band Unequal Wilkinson Power Divider

Design and fabrication of a Wilkinson power divider with harmonic suppression for LTE and GSM applications

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

Compact Ultra-Wideband Wilkinson Power Divider in Parallel Stripline with Modified Isolation Branches

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

A Wilkinson power divider with harmonic suppression through low-pass filter for GSM and LTE applications

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Design of Compact UWB Power Divider with One Narrow Notch-Band

Dual-band Wilkinson Power Divider Based on SS-CML

Miniaturized filtering equal/unequal Wilkinson power dividers

Harmonic Suppressed Wilkinson Power Divider Using Parallel Resonant Shunt Stub

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Wideband filtering power divider based on D-CRLH resonator

Design of a microstrip Wilkinson power divider using a low pass filter with the particle swarm optimization algorithm

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines