Abstract:We propose and numerically analyze the hybrid Si-Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} strip waveguide switches for Mid-IR wavelength of 2.1 $\mu$m. The switches investigated are one input-one output (on-off) type and one input-two outputs (directional coupler) type. The reversible transition between the switch states is achieved by inducing the phase transition from crystalline to amorphous and vice-versa by application of voltage pulses. The approach of embedding the nanoscale active material Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} within the Si waveguide is taken to enhance the interaction of light with the active region of the switches. The dimensions of the active regions of the switches are optimized to achieve low insertion loss, low switching energy, and high extinction ratio. In case of one input-one output switch, an extinction ratio of 33.79 dB along with an extremely low insertion loss of 0.52 dB is achieved using optimum Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} length of only 0.92 $\mu$m. For one input-two outputs switch, an extinction ratio of 10.33 dB and 5.23 dB is obtained in cross and bar state respectively using an active length of 52 $\mu$m. These values of extinction ratio, which are otherwise 18.59 dB and 8.33 dB respectively, are due to the necessity of doping the Si beneath the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} to facilitate the electrical conduction needed for Joule heating. A suitable gap of 100 nm is kept between the active and passive arm of the directional coupler switch. The electro-thermal co-simulations confirm that phase change occurs in whole of the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} region in both types of switches.

Gallium-Based Liquid Metal Substrate Integrated Waveguide Switches

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

Reconfigurable Liquid Metal-Based SIW Phase Shifter

Surface-Loaded Ferrite Substrate Integrated Waveguide Switch

Carrier Injection-Based Digital Optical Switch With Reconfigurable Output Waveguide Arms

A High-Performance 220–290 GHz Micromachined Waveguide Switch Based on Interference Between MEMS Reconfigurable Surfaces

Improved digital optical switching using carrier injection induced reconfigurable waveguides

10-GHz Low-Loss Liquid Metal SIW Phase Shifter for Phased Array Antennas

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Phase Reconfiguration Via SIW Structures Filled with Liquid Metal

Slow-Wave Substrate Integrated Waveguide with Low Loss and Miniaturized Dimensions Using TGV Technology

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

Low-voltage Micromachining-Based Scalable Optical Switch

Non-volatile Flexible-Grid Wavelength-Selective Switch Using Subwavelength-Grating-ge2sb2te5-assisted Silicon Microring Resonators

Compact Arrayed-Waveguide Grating on Silicon-On-Insulator with Integrated Waveguide Turning Mirrors

Thermopneumatic Liquid Metal Radiofrequency Switch Actuated by Low‐Boiling‐Point Fluid

A Single-Pole Double-Throw (SPDT) Circuit Using Lateral Metal-Contact Micromachined Switches

Feasibility Study of a Ge2Sb2Te5-clad Silicon Waveguide As a Non-Volatile Optical On-off Switch

Mid-IR non-volatile silicon photonic switches using nanoscale Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} embedded in SOI waveguide

Design, Optimization, and Performance Evaluation of GSST Clad Low-Loss Non-Volatile Switches.