Abstract:Abstract Spherical AlN powders with micrometer size have attracted great attention owing to their good fluidity and dispersity. However, the industrial preparation methods usually require high temperature and long soaking time, which lead to the high cost and limit the wide application of the products. Herein, nearly spherical AlN particles with the average size of 2.5 μm were successfully synthesized via an in-situ combustion synthesis method. The effect of N 2 pressure, NH 4 Cl content, and Al particle size on the combustion reaction procedure, phase composition, and microstructure of the products was systematically investigated. The results showed that the decreased N 2 pressure, increased NH 4 Cl content, and Al particle size led to the decreasing of combustion temperature and speed, which further affected the morphology of the products. As a result, low N 2 pressure (0.2 MPa), a small amount of NH 4 Cl (0.5 wt%), and fine Al particles (∼2.5 μm) contributed to a moderate combustion temperature and facilitated the formation of nearly spherical AlN particles. In addition, based on the gas-releasing assisted quenching experiments and thermo-kinetic analysis, a two-step growth mechanism for the nearly spherical AlN particles was rationally proposed. The present method shows the advantages of low cost and high efficiency for preparing nearly spherical AlN particles, which can be used as raw materials for electronic substrates and fillers for packaging materials.

Synthesis of Ultrafine AlN Powders in an Al-O-C-N System

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Facile synthesis of monodisperse aluminum nitride microspheres

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

Synthesis of AlN nanocrystalline powders

Preparation of AlN Powder of Low Oxygen Content Via Carbothermal Reduction and Nitridation by Active Gas Exchange Technique

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Synthesis of Aluminum Nitride Powders from A Plasma-Assisted Ball Milled Precursor Through Carbothermal Reaction

Preparation of ultrafine composite particles of Ag+AlN/Al by nitrogen plasma metal reaction

Novel Way to Synthesize Nanocrystalline Aluminum Nitride from Coarse Aluminum Powder

Recent Progress in Study of Preparation of AlN-SiC Composite Ultrafine Powder

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

PREPARATION AND CHARACTERIZATION OF ALUMINUM OXYNITRIDE NANOPOWDER

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

RESEARCH ON THE REACTION SYNTHESIS OF AlN-BASED CERAMICS WITH THE ADDITION OF Y2O3

Some properties of aluminium-nitride powder prepared by metal-organic chemical vapour deposition

Combustion Synthesis of Rod-Like AlN Nanoparticles

Thermodynamic and kinetic analyses of vacuum synthesis of AlN by the alumina carbothermal reduction nitridation method

Synthesis of NdAlO3 Fine Ceramic Powders Via Co-precipitation Process

Controlled Synthesis and Characterization of 10 Nm Thick Al2O3 Nanowires

Synthesis of Nano-Size AlN Powders by Carbothermal Reduction from Plasma-Assisted Ball Milling Precursor