Abstract:The two main polymorphs of boron nitride are hexagonal (h-BN) and cubic (c-BN) phases and both show attractive material properties to be employed under extreme environments. h-BN is also known as "white graphene" due to the matching hexagonal crystal symmetry and shows a layered structure which provides advantages as a lubricant material and as gate dielectrics for two-dimensional (2D) transistor channels. On the other hand, c-BN is analogous to another important elemental carbon material, diamond. While the mechanical strength of c-BN is lower than diamond, the thermal and chemical stability is even superior. Both h-BN and c-BN films are therefore strong candidates for applications under harsh ambient, including high-temperature, high-pressure, and corroding factors. BN films and coatings are conventionally grown using high-temperature CVD methods with typical substrate temperatures over 1000 o C. To reduce the deposition temperatures of this material while preserving the attractive crystal properties, alternative lower temperature physical and chemical vapor deposition strategies have been offered in the literature. Plasma-enhanced atomic layer deposition (PEALD) provides significant advantages over other methods such as precision thickness control, ultimate conformality, while reducing the growth temperature substantially. In our previous work, we had demonstrated the crystalline synthesis of h-BN films at substrate temperatures as low as 350 o C, while no growth was observed at lower substrate temperatures. In this work, we aim to demonstrate the feasibility of growing c-BN at substrate temperatures reaching 200 o C via a customized PEALD reactor featuring a large-diameter capacitively-coupled hollow-cathode plasma source with a relatively short source-to-substrate distance. We used Si(100), sapphire, and glass as the substrates to deposit the films. The growth temperature is kept between 150 and 250 °C, 10 sccm of N 2 flow is used as a carrier gas and Ar-purging gas flow was kept at 50 sccm. The triethylboron (TEB) precursor and various nitrogen plasma chemistries including different compositions of N 2 , H 2 , and Ar gases are utilized. The optimized growth condition is determined from in-situ monitored saturation studies, where the growth-per-cycle (GPC) parameter is noted for different precursor pulse time (15 and 30 ms), rf-plasma power (100 W to 250 W) and plasma-gas chemistries (N 2 -only, N 2 /H 2 , Ar/N 2 , Ar/N 2 /H 2 at varying ratios). While the 200 °C as-grown BN films exhibited nanocrystalline c-BN with relatively weak crystal peaks as verified by XRD measurements, vacuum annealing at 5 mTorr N 2 flow and 700 °C transformed the film structure into single-phase polycrystalline c-BN. The spectroscopic ellipsometer, x-ray reflectivity (XRR), and x-ray photoelectron spectroscopy (XPS) studies will be presented as well as the influence of post-deposition vacuum annealing to further improve the crystalline structure of c-BN films. Basic electrical properties of the grown BN films will be characterized using metal-insulator-semiconductor (MIS) diode temperature-dependent current-voltage (I-V) measurements. A specific effort will be devoted to enhance the as-grown film crystal properties via implementing novel atomic layer plasma annealing processes, which showed its potential for the ultrawide bandgap Ga 2 O 3 alloy. Another research question to be investigated is whether there is a possibility of tuning the material phase from cubic to hexagonal by carefully adjusting growth and in-situ Ar-plasma annealing conditions.

Boron Nitride Phosphide Thin Films Grown on Quartz Substrate by Hot-Filament and Plasma-Assisted Chemical Vapor Deposition

Dielectric Barrier Discharge Assisted Chemical Vapor Deposition of Boron Nitride Phosphide Films on A Quartz Substrate

Growth of BN1-xPx Films by HF-PECVD

Phosphor induced optical band gap modulation of BPxN1-x films

Growth of 2D Black Phosphorus Film from Chemical Vapor Deposition.

Deposition of BPx N1-x Thin Films and Study on the Influence of Phosphorus for Its Bandgap Modulation

Electrical and Optical Properties of Boron‐doped Nanocrystalline Silicon Films Deposited by PECVD

BN Films Deposited by HFPECVD and the Mechanism of the Process

Facile Synthesis and Characterization of Hexagonal Boron Nitride Nanoplates by Two‐Step Route

Low-Temperature Self-Limiting Growth of Cubic Boron Nitride Via Hollow-Cathode Plasma-Enhanced Atomic Layer Deposition

Highly Transparent Nanocrystalline Diamond Films On Quartz Substrates

Hexagonal Boron Nitride Seed Layer-Assisted van der Waals Growth of BaSnO3 Perovskite Films

Direct Growth of 5 In. Uniform Hexagonal Boron Nitride on Glass for High‐Performance Deep‐Ultraviolet Light‐Emitting Diodes

Nonlinear absorption and nonlinear refraction in a chemical vapor deposition-grown, ultrathin hexagonal boron nitride film

Investigation on the Microstructure and Optical Properties of C-Axis Oriented Nanocrystalline Hexagonal Bn Films Fabricated by Hot-Filament Chemical Vapor Deposition

Structural, optical, and thermal properties of BN thin films grown on diamond via pulsed laser deposition

Regulating the Electronic and Optic Properties of Hexagonal Boron Nitride Nanosheets Via Phosphorus Doping

Hexagonal Boron Nitride Thick Film Grown on a Sapphire Substrate via Low-Pressure Chemical Vapor Deposition

High-Crystallinity and High-Temperature Stability of the Hexagonal Boron Nitride Film Grown on Sapphire

Vertically Aligned Boron Nitride Nanosheets: Chemical Vapor Synthesis, Ultraviolet Light Emission, and Superhydrophobicity.

Phase evolution in boron nitride thin films prepared by a dc-gasdischarge assisted pulsed laser deposition