Abstract:One of the challenges for improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of effective interconnect materials. A widely used interconnect ceramic for SOFCs is doped lanthanum chromite. In this paper, we report a doped lanthanum chromite, La0.7Ca0.3CrO3−δ (LCC)+xwt.% Gd0.2Ce0.8O1.9 (GDC) (x=0–10), with improved electrical conductivity and sintering capability. In this composite material system, LCC+GDC were prepared by an auto-ignition process and the electrical conductivity was characterized in air and in H2. The LCC powders exhibited a better sintering ability and could reach a 94.7% relative density at 1400°C for 4h in air and with the increase of GDC content the relative density increased, reached 98.5% when the GDC content was up to 10wt.%. The electrical conductivity of the samples dramatically increased with GDC addition until a maximum of 134.48Scm−1 in air at 900°C when the materials contained 3wt.% GDC. This is 5.5 times higher than pure LCC (24.63Scm−1). For the sample with a 1wt.% GDC content, the conductivity in pure H2 at 900°C was a maximum 5.45Scm−1, which is also higher than that of pure LCC ceramics (4.72Scm−1). The average thermal expansion coefficient (TEC) increased with the increase of GDC content, ranging from 11.12 to 14.32×10−6K−1, the majority of which unfortunately did not match that of 8YSZ. The oxygen permeation measurement presented a negligible oxygen ionic conduction, indicating that it is still an electronically conducting ceramic. Therefore, it is a very promising interconnect material for higher performance and cost-effectiveness for SOFCs.

Electrical Properties, Sintering and Thermal Expansion Behavior of Composite Ceramic Interconnecting Materials, La0.7Ca0.3CrO3−δ/Y0.2Ce0.8O1.9 for SOFCs

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Preparation and properties of ceramic interconnecting materials, La0.7Ca0.3CrO3-δ doped with GDC for IT-SOFCs

Improved Electrical Performance and Sintering Ability of the Composite Interconnect La0.7Ca0.3CrO3−δ/Ce0.8Nd0.2O1.9 for Solid Oxide Fuel Cells

High Performance Composite Interconnect La0.7ca0.3cro3/20 Mol% Reo1.5 Doped Ceo2 (re = Sm, Gd, Y) for Solid Oxide Fuel Cells

Influence of Cr deficiency on sintering, thermal expansion and electrical properties of La0.75Sr0.25Cr1−xO3−δ as a SOFC interconnect material

High sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs

Short communicationHigh sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs

Novel Composite Interconnecting Ceramics La0.7Ca0.3CrO3−δ/Ce0.8Sm0.2O1.9 for Solid Oxide Fuel Cells

Preparation and Electrical Behavior Study of the Ceramic Interconnect La0.7Ca0.3CrO3−δ with CeO2-based Electrolyte Ce0.8Sm0.2O1.9

Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3-δ perovskite oxide as novel interconnect material for solid oxide fuel cells

Preparation And Electrical Properties Of Interconnect Material Made By Substituting Mixed Rare Earth Oxides (Sm2o3, Gd2o3, Eu2o3 And Ceo2) For La2o3 In La1-Xcaxcro3 (0.1 <= X <= 0.4)

Stable, Easily Sintered Ca–Zn-doped YCrO3 As Novel Interconnect Materials for Co-Fired Yttrium-Stabilized Zirconia-Based Solid Oxide Fuel Cells

Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm<sub>2</sub>O<sub>3</sub>, Gd<sub>2</sub>O<sub>3</sub>, Eu<sub>2</sub>O<sub>3</sub> and CeO<sub>2</sub>) for La<sub>2</sub>O<sub>3</sub> in La

Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm<sub>2</sub>O<sub>3</sub>, Gd<sub>2</sub>O<sub>3</sub>, Eu<sub>2</sub>O<sub>3</sub> and CeO<sub>2</sub>) for La<sub>2</sub>O<sub>3</sub> in La

Low temperature sintering ability and electrical conductivity of SOFC interconnect material La0.7Ca0.3Cr0.97O3

Influence of Zn-doping on low-temperature sintering ability and electrical conductivity of YCrO3-based ceramic interconnect materials

Stable and Easily Sintered (pr0.5nd0.5)0.7ca0.3cro3−δ/sm0.2ce0.8o1.9 Composite Interconnect Materials for IT-solid Oxide Fuel Cells

Influence of Cr Deficiency on Sintering Character and Properties of SOFC Interconnect Material La0.7Ca0.3Cr1−xO3−δ

A Novel Interconnect Material for Sofcs

Microwave assisted synthesis,sinterability and properties of Ca-Zn co-doped LaCrO_3 as interconnect material for IT-SOFCs