Abstract:One of the challenges for improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of effective interconnect materials. A widely used interconnect ceramic for SOFCs is doped lanthanum chromite. In this paper, we report a doped lanthanum chromite, La0.7Ca0.3CrO3−δ (LCC)+xwt.% Gd0.2Ce0.8O1.9 (GDC) (x=0–10), with improved electrical conductivity and sintering capability. In this composite material system, LCC+GDC were prepared by an auto-ignition process and the electrical conductivity was characterized in air and in H2. The LCC powders exhibited a better sintering ability and could reach a 94.7% relative density at 1400°C for 4h in air and with the increase of GDC content the relative density increased, reached 98.5% when the GDC content was up to 10wt.%. The electrical conductivity of the samples dramatically increased with GDC addition until a maximum of 134.48Scm−1 in air at 900°C when the materials contained 3wt.% GDC. This is 5.5 times higher than pure LCC (24.63Scm−1). For the sample with a 1wt.% GDC content, the conductivity in pure H2 at 900°C was a maximum 5.45Scm−1, which is also higher than that of pure LCC ceramics (4.72Scm−1). The average thermal expansion coefficient (TEC) increased with the increase of GDC content, ranging from 11.12 to 14.32×10−6K−1, the majority of which unfortunately did not match that of 8YSZ. The oxygen permeation measurement presented a negligible oxygen ionic conduction, indicating that it is still an electronically conducting ceramic. Therefore, it is a very promising interconnect material for higher performance and cost-effectiveness for SOFCs.

Improved Electrical Performance and Sintering Ability of the Composite Interconnect La0.7Ca0.3CrO3−δ/Ce0.8Nd0.2O1.9 for Solid Oxide Fuel Cells

Novel Composite Interconnecting Ceramics La0.7Ca0.3CrO3−δ/Ce0.8Sm0.2O1.9 for Solid Oxide Fuel Cells

Preparation and Electrical Behavior Study of the Ceramic Interconnect La0.7Ca0.3CrO3−δ with CeO2-based Electrolyte Ce0.8Sm0.2O1.9

High Performance Composite Interconnect La0.7ca0.3cro3/20 Mol% Reo1.5 Doped Ceo2 (re = Sm, Gd, Y) for Solid Oxide Fuel Cells

Electrical Properties, Sintering and Thermal Expansion Behavior of Composite Ceramic Interconnecting Materials, La0.7Ca0.3CrO3−δ/Y0.2Ce0.8O1.9 for SOFCs

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Preparation and properties of ceramic interconnecting materials, La0.7Ca0.3CrO3-δ doped with GDC for IT-SOFCs

Preparation And Electrical Properties Of Interconnect Material Made By Substituting Mixed Rare Earth Oxides (Sm2o3, Gd2o3, Eu2o3 And Ceo2) For La2o3 In La1-Xcaxcro3 (0.1 <= X <= 0.4)

Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm<sub>2</sub>O<sub>3</sub>, Gd<sub>2</sub>O<sub>3</sub>, Eu<sub>2</sub>O<sub>3</sub> and CeO<sub>2</sub>) for La<sub>2</sub>O<sub>3</sub> in La

Influence of CeO2-doping on Low-temperature Sintering Ability and Electrical Conductivity of La0.7Ca0.3CrO3-δ

Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm<sub>2</sub>O<sub>3</sub>, Gd<sub>2</sub>O<sub>3</sub>, Eu<sub>2</sub>O<sub>3</sub> and CeO<sub>2</sub>) for La<sub>2</sub>O<sub>3</sub> in La

Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3-δ perovskite oxide as novel interconnect material for solid oxide fuel cells

Chemical Compatibility, Thermal Expansion Matches and Electrochemical Performance of SrCo0.8Fe0.2O3−δ–La0.45Ce0.55O2−δ Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Electrochemical Characterization of LaBaCuCoO5+δ–Sm0.2Ce0.8O1.9 Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

High sintering activity Cu–Gd co-doped CeO2 electrolyte for solid oxide fuel cells

Preparation and performance of composite cathode materials for IT-SOFC

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

Bifunctional Ce0.9Gd0.09M0.01O2−δ (M = Fe, Cu) interlayers with micro-doping for high-performance solid oxide fuel cells

Improved Electrical Conductivity of Ce0.9Gd0.1O1.95 and Ce0.9Sm0.1O1.95 by Co-Doping

Stable and Easily Sintered (pr0.5nd0.5)0.7ca0.3cro3−δ/sm0.2ce0.8o1.9 Composite Interconnect Materials for IT-solid Oxide Fuel Cells