Abstract:One of the challenges for improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of effective interconnect materials. A widely used interconnect ceramic for SOFCs is doped lanthanum chromite. In this paper, we report a doped lanthanum chromite, La0.7Ca0.3CrO3−δ (LCC)+xwt.% Gd0.2Ce0.8O1.9 (GDC) (x=0–10), with improved electrical conductivity and sintering capability. In this composite material system, LCC+GDC were prepared by an auto-ignition process and the electrical conductivity was characterized in air and in H2. The LCC powders exhibited a better sintering ability and could reach a 94.7% relative density at 1400°C for 4h in air and with the increase of GDC content the relative density increased, reached 98.5% when the GDC content was up to 10wt.%. The electrical conductivity of the samples dramatically increased with GDC addition until a maximum of 134.48Scm−1 in air at 900°C when the materials contained 3wt.% GDC. This is 5.5 times higher than pure LCC (24.63Scm−1). For the sample with a 1wt.% GDC content, the conductivity in pure H2 at 900°C was a maximum 5.45Scm−1, which is also higher than that of pure LCC ceramics (4.72Scm−1). The average thermal expansion coefficient (TEC) increased with the increase of GDC content, ranging from 11.12 to 14.32×10−6K−1, the majority of which unfortunately did not match that of 8YSZ. The oxygen permeation measurement presented a negligible oxygen ionic conduction, indicating that it is still an electronically conducting ceramic. Therefore, it is a very promising interconnect material for higher performance and cost-effectiveness for SOFCs.

Stable and Easily Sintered (pr0.5nd0.5)0.7ca0.3cro3−δ/sm0.2ce0.8o1.9 Composite Interconnect Materials for IT-solid Oxide Fuel Cells

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

High Performance Composite Interconnect La0.7ca0.3cro3/20 Mol% Reo1.5 Doped Ceo2 (re = Sm, Gd, Y) for Solid Oxide Fuel Cells

Preparation and properties of ceramic interconnecting materials, La0.7Ca0.3CrO3-δ doped with GDC for IT-SOFCs

Nd 0.5 Sr 0.5 Fe 0.8 Cu 0.2 O 3−δ – X Sm 0.2 Ce 0.8 O 1.9 Cobalt-Free Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Electrical Properties, Sintering and Thermal Expansion Behavior of Composite Ceramic Interconnecting Materials, La0.7Ca0.3CrO3−δ/Y0.2Ce0.8O1.9 for SOFCs

Preparation and Investigation of Cu Doped(Pr0.5Nd0.5)0.7Ca0.3CrO3–δ Ceramic Interconnect Materials

Electrochemical Characterization of LaBaCuCoO5+δ–Sm0.2Ce0.8O1.9 Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Improved Electrical Performance and Sintering Ability of the Composite Interconnect La0.7Ca0.3CrO3−δ/Ce0.8Nd0.2O1.9 for Solid Oxide Fuel Cells

Improved Electrochemical Performance and Thermal Expansion Compatibility of LnBaCoFeO5+δ–Sm0.2Ce0.8O1.9 (lnpr and Nd) Composite Cathodes for IT-SOFCs

High sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs

Stable, Easily Sintered Ca–Zn-doped YCrO3 As Novel Interconnect Materials for Co-Fired Yttrium-Stabilized Zirconia-Based Solid Oxide Fuel Cells

Development of A Novel Type of Composite Cathode Material for Proton-Conducting Solid Oxide Fuel Cells

PrNi 0.6Co 0.4O 3-Ce 0.8Sm 0.2O 1.9 composite cathodes for intermediate temperature solid oxide fuel cells

Characterization of SrCo 0.7 Fe 0.2 Nb 0.1 O 3−δ cathode materials for intermediate-temperature solid oxide fuel cells

Cerium and Niobium Doped SrCoO3−δ As a Potential Cathode for Intermediate Temperature Solid Oxide Fuel Cells

CO2-stable Alkaline-earth-free Solid Oxide Fuel Cells with Ni0.7Co0.3O-Ce0.8Sm0.2O1.9 Composite Cathodes

Preparation And Investigation Of Cu Doped (Pr0.5nd0.5)(0.7)Ca0.3cro3-Delta Ceramic Interconnect Materials

Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3-δ perovskite oxide as novel interconnect material for solid oxide fuel cells

Short communicationHigh sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs

Microwave assisted synthesis,sinterability and properties of Ca-Zn co-doped LaCrO_3 as interconnect material for IT-SOFCs