Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3-δ perovskite oxide as novel interconnect material for solid oxide fuel cells

Songlin Wang,Bin Lin,Yonghong Chen,Xingqin Liu,Guangyao Meng
DOI: https://doi.org/10.1016/j.jallcom.2009.01.039
IF: 6.2
2009-01-01
Journal of Alloys and Compounds
Abstract:Simple, easily sintered perovskite oxide as a novel interconnect material for solid oxide fuel cells (SOFCs) was evaluated at a SOFC co-firing temperature (1400 degrees C). Chemical compatibility, sintering character, electrical conductivity and thermal expansion were investigated to characterize the compatibilities of La0.7Ca0.3Cr0.97O3-delta (LCC97) with Y0.16Zr0.84O2-delta (YSZ), NiO, Sm0.2Ce0.8O2-delta (SDC), La0.8Sr0.2MnO3-delta (LSM), and BaZr0.1Ce0.7Y0.2O3-delta (BZCY), respectively The XRD analysis indicates LCC97 chemically incompatible with BZCY. The mixtures of LCC97/SDC and LCC97/NiO, respectively, exhibit high relative densities of 97.6% and 96.2% after sintering at 1400 degrees C for 5 h in air. However, the samples of LCC97/YSZ and LCC97/LSM only have poor sintering abilities. The samples of LCC97 mixed with LSM, SDC, NiO and YSZ, respectively, have a decreasing electrical conductivity of 24.0 S cm(-1), 12.2 S cm(-1), 7.8 S cm(-1) and 0.17 S cm(-1) at 850 degrees C in air, which are all much lower than that of the LCC97 sample (62.0 S cm(-1)). Different mixing slightly increases the TEC value of LCC97. Results indicate that, under SOFC co-firing conditions, the novel interconnect material LCC97 has desired compatibilities with SDC and NiO, while it displays poor compatibilities with YSZ and LSM. (C) 2009 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?