Abstract:Amorphous indiumgalliumzinc-oxide thin film transistors (a-IGZO TFTs) with damage-free back channel wet-etch (BCE) process were achieved by introducing a carbon nanofilm as a barrier layer. We investigate the effects of different source-and-drain (S/D) materials on TFT performance. We find the TFT with Ti/C S/D electrodes exhibits a superior performance with higher output current, lower threshold voltage, and higher effective electron mobility compared to that of Mo/C S/D electrodes. Transmittance electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) are employed to analysis the interfacial interaction between S/D metal/C/a-IGZO layers. The results indicate that the better performance of TFTs with Ti/C electrodes should be attributed to the formations of TiC and TiO at the Ti/C-contact regions, which lead to a lower contact resistance, whereas Mo film is relatively stable and does not react easily with C nanofilm, resulting in a nonohmic contact behavior between Mo/C and a-IGZO layer. However, both kinds of a-IGZO TFTs show good stability under thermal bias stress, indicating that the inserted C nanofilms could avoid the impact on the a-IGZO channel regions during S/D electrodes formation. Finally, we successfully fabricated a high-definition active-matrix organic lighting emitting diode prototype driven by a-IGZO TFTs with Ti/C electrodes in a pilot line.

Effect of Source/drain Preparation on the Performance of Oxide Thin-Film Transistors

Influence of Source and Drain Contacts on the Properties of the Indium-Zinc Oxide Thin-Film Transistors Based on Anodic Aluminum Oxide Gate Dielectrics

Effects of Source/Drain Electrodes on the Performance of InSnO Thin-Film Transistors

Influence of Source and Drain Contacts on the Properties of Indium-Gallium Zinc-Oxide Thin-Film Transistors Based on Amorphous Carbon Nanofilm As Barrier Layer

P-1.13: Influence of the Source/Drain Material on Oxide Semiconductor Thin Film Transistors

Effect of Source/ Drain Electrode Fabrication Technology on the Electrical Properties of Solution-processed A-IGZO Based Transistors

Effect of Al Doping on Performance of ZnO Thin Film Transistors

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Solution-Processed Indium-Zinc-Oxide Thin-Film Transistors Based On Anodized Aluminum Oxide Gate Insulator Modified With Zirconium Oxide

Impact of the Source/Drain Electrode Process on the Mobility-Threshold Trade-Off for InSnZnO Thin-Film Transistors

Effect of O2 Incorporation During the Channel Fabrication Process on Aluminum-Doped Zinc Oxide Thin-Film Transistor Characteristics

Preparation and Characterization of Molybdenum-Doped Indium-Zinc-Oxide Thin Film Transistors

Influence of passivation deposition on the performance of In-Zn-O thin-film transistors based on etch-stopper structure

Effect of Source/Drain Electrodes on the Electrical Properties of Silicon–Tin Oxide Thin-Film Transistors

Performances and Preparation of Zinc-Tin Oxide Thin-Film Transistors

Titanium doped Zinc-oxide based Thin Film Transistors: Optimization of the source/drain materials

Amorphous Indium-zinc-oxide Thin-film Transistors with Copper Source/Drain Electrodes

Performance Enhancement of Indium Zinc Oxide Thin-Film Transistors Through Process Optimizations

Effect of Sc2O3 Passivation Layer on the Electrical Characteristics and Stability of InSnZnO Thin-Film Transistors

Mo/Cu Source/Drain Electrodes for Amorphous InGaZnO Thin Film Transistors

Influence of Source and Drain Electrodes on Device Performance of ZnO Thin Film Transistors