Abstract:We present a dual active layer structure composed of indium–zinc oxide (InZnO) and indium–magnesium–zinc oxide (InMgZnO), which is fabricated using a simple solution process. By utilizing a heterojunction structure, combined with the high mobility of the front channel (InZnO) and the low ${\mathrm{\scriptstyle OFF}}$ -state current of the back channel (InMgZnO), we are able to achieve thin-film transistor (TFT) devices with enhanced performance and greater stability. Finally, we are able to optimize the device by optimizing the front channel thickness and treating the heterojunction interface with oxygen plasma, achieving a mobility ( $\mu _{\text {sat}}$ ) of 5.94 cm2/( $\text {V}\cdot \text {s}$ ), a threshold voltage of 0.98 V, an ${I} _{ { {\text {ON}}}}/{I} _{ { {\text {OFF}}}}$ ratio of $7.49\times 10^{{8}}$ , and a subthreshold swing (SS) of 325 mV/decade. Furthermore, the device maintains almost unchanged hysteresis voltage and exhibits high bias stability, which is demonstrated by the minimal threshold voltage variation of only 0.27 and −0.21 V under positive gate bias (PBS) and negative gate bias (NBS) for 1 h, respectively. The high electrical performance and stability of heterojunction TFTs can be attributed to the reduced interfacial defect state achieved through oxygen plasma treatment, as well as the electron redistribution occurring at the heterojunction interface.

Performance Enhancement of Indium Zinc Oxide Thin-Film Transistors Through Process Optimizations

High Performance Indium‐Gallium‐Zinc Oxide Thin Film Transistor via Interface Engineering

Amorphous InZnSnO thin-film-transistors performance enhancement with low-energy Xenon Pulsed-light annealing

Impact of pre-annealing process on electrical properties and stability of indium zinc oxide thin-film transistors

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Enhancing the Stability and Mobility of TFTs via Indium-Tungsten Oxide and Zinc Oxide Engineered Heterojunction Channels Annealed in Oxygen Ambient

Influence of radio-frequency magnetron sputtering power on electrical characteristics and positive bias stress stability of indium tin zinc oxide thin-film transistors

Exploring the Potential of InCp Precursor in Plasma-Enhanced Atomic Layer Deposition for High-Performance IZO-TFTs

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Performance enhancement of ATZO TFTs by component control and post treatment

Performance Enhancement of TiZO Thin Film Transistors by Introducing a Thin ITO Interlayer

Performance Improvement of In-Ga-Zn Oxide Thin-Film Transistors by Excimer Laser Annealing

The improved properties of solution-based InGaSnO (IGTO) thin film transistor using the modification of InZnO (IZO) layer

Improved Performance and Bias Stability of Al2O3/IZO Thin-Film Transistors with Vertical Diffusion

Performance Enhancement for Indium-Free Metal Oxide Thin-Film Transistors with Double-Active-Layers by Magnetron Sputtering at Room Temperature

Ultrasonic Treatment-Induced Enhancement of Mechanical and Electrical Properties in InGaZnO Thin-Film Transistors

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimizing Channel Structure

P‐1.8: High Performance Amorphous IZO/IGZO Bilayer Thin Film Transistors for Ink‐jet Printed AMOLED Displays

High‐Performance Thin‐Film Transistors with Nickel‐Doped Indium Zinc Oxide Channel Layers

Achieving High-Performance Solution-Processed Thin-Film Transistors by Doping Strong Reducibility Element Into Indium-Zinc-Oxide

High Performance of a‐IZTO TFT by Purification of the Semiconductor Oxide Precursor