Abstract:This study examines the thermodynamic and numerical analyses of a methane-fed solid oxide fuel cell (SOFC) over a temperature range varying between 873 K and 1273 K. These analyses were conducted to investigate and compare the performance of the SOFC under various operating conditions in detail. As part of the thermodynamic analysis, important parameters such as cell voltage, power density, exergy destruction, entropy generation, thermal efficiency, and exergy efficiency were calculated. These calculations were used to conduct energy and exergy analyses of the cell. According to the findings, an increase in operating temperature led to a significant improvement in performance. At the initial conditions where the SOFC operated at a temperature of 1073 K and a current density of 9000 A/m2, it was observed that when the temperature increased by 200 K while keeping the current density constant, the power density increased by a factor of 1.90 compared to the initial state, and the thermal efficiency increased by a factor of 1.45. Under a constant current density, the voltage and power density values were 1.0081 V, 1.0543 V, 2337.13 W/m2, and 2554.72 W/m2 at operating temperatures of 1073 K and 1273 K, respectively. Under a current density of 4500 A/m2, the entropy generation in the cell was determined to be 29.48 kW/K at 973 K and 23.68 kW/K at 1173 K operating temperatures. The maximum exergy efficiency of the SOFC was calculated to be 41.67% at a working temperature of 1273 K and a current density of 1500 A/m2. This study is anticipated to be highly significant, as it examines the impact of temperature variation on exergy analysis in SOFC, validating both numerical and theoretical results, thus providing a crucial roadmap for determining optimized operating conditions.

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

Direct liquid methanol-fueled solid oxide fuel cell

Development of Methanol-Fueled Low-Temperature Solid Oxide Fuel Cells

Performance of solid-oxide fuel cells operating with different sustainable fuel reformates

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Thermodynamic performance comparison of a SOFC system integrated with steam reforming and dry reforming by utilizing different fuels

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Numerical and Thermodynamic Analysis of the Effect of Operating Temperature in Methane-Fueled SOFC

Electrochemical Characteristics and Carbon Tolerance of Solid Oxide Fuel Cells with Direct Internal Dry Reforming of Methane

Evaluating the influence of working parameters on the efficiency of a solid oxide fuel cell by conducting sensitivity analysis using electrochemical and thermodynamic modeling

Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Performance of a Direct Methanol Fuel Cell

Configurations and Operation Methods of Diesel-Based Solid Oxide Fuel Cell System

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability