Abstract:Solid oxide fuel cell (SOFC) has been regarded as one of the promising energy conversion technologies since it provides higher efficiency and lower pollution than conventional power systems. How to improve the SOFC efficiency is one of the focus issues in both industry and academia. Besides, when industrial-size SOFC is operated at high fuel utilization (U-fuel) to achieve high efficiency, the Ni anode in the downstream region may be locally oxidized due to the high oxygen partial pressure. Thus, operating conditions for both high efficiency and anode safety are required. In this work, a method for the measurement and evaluation of SOFC efficiency was established. By comparing the test results under different conditions (current, fuel flow rate, and temperature) with high fuel utilization, it was found that at the same fuel utilization, the voltage decreased as the current increased. Therefore, the lower current is beneficial for higher efficiency, while the higher current is beneficial for higher power. The relationship between voltage fluctuation and local oxidation of anode during operation at high fuel utilization was also studied. After analyzing the critical condition of Ni oxidation, the cell output voltage higher than the critical electromotive force of Ni oxidation was proposed as the safe operating condition to prevent local oxidation of anode. Based on the cell samples and test parameters used in this work, it was found a high efficiency of over 50% was corresponding to the fuel utilization range of 77% to 90%. And the maximum electrical efficiency was always corresponding to U-fuel=87.10%. Although the operating conditions corresponding to the maximum efficiency of SOFC cells or stacks with different materials, structures, and fabrication processes may vary, the measurement and evaluation methods, as well as the judgment of the safe operating condition proposed in this study, are still helpful. In practical application, the operating conditions could be determined based on such testing results according to the importance of efficiency, power and long-term stability.

Configurations and Operation Methods of Diesel-Based Solid Oxide Fuel Cell System

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Thermodynamic analyses of a standalone diesel-fueled distributed power generation system based on solid oxide fuel cells

Improvement of the SOFC System by Anode Recirculation

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Direct liquid methanol-fueled solid oxide fuel cell

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Study of Operating Conditions for High Efficiency and Anode Safety of Industrial-Size Solid Oxide Fuel Cell

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

Prospect of carbon-based solid oxide fuel cells

Research and Development of Solid Oxide Direct Carbon Fuel Cell

Performance Improvement of a Direct Carbon Solid Oxide Fuel Cell Through Integrating an Otto Heat Engine

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Evaluating the influence of working parameters on the efficiency of a solid oxide fuel cell by conducting sensitivity analysis using electrochemical and thermodynamic modeling

One-dimensional Dynamic Modeling and Simulation of a Planar Direct Internal Reforming Solid Oxide Fuel Cell

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Performance of solid-oxide fuel cells operating with different sustainable fuel reformates

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

Parametric Analysis of A Solid Oxide Fuel Cell Auxiliary Power Unit Operating on Syngas Produced by Autothermal Reforming of Hydrocarbon Fuels

Performance Improvement of a Direct Carbon Solid Oxide Fuel Cell System by Combining with a Stirling Cycle