Abstract:Direct internal dry reforming is a promising way for solid oxide fuel cells (SOFCs) to directly use hydrocarbon fuels, since biogas already contains carbon dioxide and methane, which are both greenhouse gas contributing to global warming. In this paper, detailed experimental investigation and thermodynamic calculation were carried out to investigate the influence of CO2 addition on fuel cell's electrochemical characteristics and stability using CO2 to CH4 ratio ranging from 0 to 3. The maximum power densities were obtained at CO2 to CH4 ratios of 1.5 and 1.7 for fuel gas mixture with and without N-2 carrier gas, respectively. These two values are very close to thermodynamic calculation results about non-carbon limit. An analysis of distribution of relaxation time (DRT) for SOFC operated under dry reforming gas mixtures was first proposed in this study. The results show that the addition of CO2 can significantly reduce both the anode activation polarization and the fuel gas diffusion resistance at low CO2 to CH4 ratio, while the influence became weaker at higher CO2 to CH4 ratio. An additional peak, with a larger relaxation time of 10(-1)similar to 10(1) s, was observed with dry reforming gas mixtures. This process, related to dry reforming reaction and water-gas shift reaction, was also influenced by the addition of CO2. Besides, we observed an improvement of fuel cell performance by adding appropriate N-2 carrier gas to fuel gas, which may provide a new way to enhance the performance and durability of biogas-fueled SOFC.

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

Direct liquid methanol-fueled solid oxide fuel cell

Performance of solid-oxide fuel cells operating with different sustainable fuel reformates

Development of Methanol-Fueled Low-Temperature Solid Oxide Fuel Cells

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Thermodynamic performance comparison of a SOFC system integrated with steam reforming and dry reforming by utilizing different fuels

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Progress in Solid Oxide Fuel Cells with Hydrocarbon Fuels

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Influences of Hydrogen-Natural Gas Mixtures on The Performance of an Internal Reforming Solid Oxide Fuel Cell Unit: A Simulation Study

Electrochemical Characteristics and Carbon Tolerance of Solid Oxide Fuel Cells with Direct Internal Dry Reforming of Methane

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Performance of Solid Oxide Fuel Cells on H-2, Nh3 and Hydrocarbon Fuels

Energy and Parameter Analysis of SOFC System for Hydrogen Production from Methane Steam Reforming

Synergic effect investigation of carbon monoxide and other compositions on the high temperature proton exchange membrane fuel cell

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane