Abstract:On-board hydrogen generation from hydrocarbon fuels, such as methanol, natural gas, gasoline and diesel, etc., will be technically feasible in the near future for fuel cell powered vehicles. Among all the fuel processing methods, steam reforming is considered as the most widely used method of hydrogen reforming for the lower reactive temperature, pressure and higher hydrogen ratio in reformate.A laminate micro-channel catalytic reactor was designed for the purpose of hydrogen generation from hydrocarbons. The depth of the reaction channel is 0.5 mm, and the length and width are 50 mm and 40 mm, respectively. The same geometry is designed for the heating channels. A metal sheet is placed between reacting and heating channels to separate them. Piling up alternately the two channels is to buildup the laminate microchannel reactor.Numerical simulation has been conducted in one reactive unit, i.e., one reacting channel and one heating channel. The reactant is the solution of methanol and water mixing with a certain ratio. And the reaction heat is provided by hot air flow with a temperature of 600K. A 2D steady model of the reforming reactive processes was developed and solved numerically. The ratio of water and methanol is set to be at 1.3. The conversion rate of methanol was nearly 100% at the outlet of reactor, while the volume ratio of hydrogen is 51.4% with the selectivity of CO, reaches 49.2%.Detail results showed that the 50 mm long reacting channel could be divided into four different regimes along with the reacting course. In the first regime (0-5mm), methanol in the reactants is almost completely converted and CO is mainly generated in the third one (15-20mm), while reactions in the other two regimes are indiscoverable. The reasons leading to such phenomena are clarified in this paper.

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Numerical Simulation Of Steam Reforming Of Methanol In Microchannel Reactor

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Performance of a Microchannel Reactor for Reforming of Methanol

Steam Reforming of Methanol over Combustion Synthesized CuZnOx-based Catalysts for Fuel Cell Applications

Methanol Steam Reforming for Hydrogen Production in a Minireactor

Operating Performance Characteristics and Analysis of a High Temperature Fuel Cell System Integrated with a Methanol Steam Reformer

Investigation of Autothermal Reforming of Methane for Hydrogen Production in a Spiral Multi-Cylinder Micro-Reactor Used for Mobile Fuel Cell

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

Experimental Study of Performance Enhancement Strategies for Hydrogen Production-Purification Systems in Packed-Bed Reactors under Power Fluctuations

A Performance Study of Methanol Steam Reforming Microreactor with Porous Copper Fiber Sintered Felt As Catalyst Support for Fuel Cells

Development of Large-Flux Laminated Methanol Reforming Microreactor Heated by Methanol Catalytic Combustion

Experimental investigation on hydrogen production by methanol steam reforming in a novel multichannel micro packed bed reformer

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Pilot study on the use of methane steam reforming catalyst in molten carbonate fuel cell

Structural Design of Self-Thermal Methanol Steam Reforming Microreactor with Porous Combustion Reaction Support for Hydrogen Production