Abstract:Ceramic materials have good temperature and corrosion resistance, which is one of the ideal materials used in microchannel catalyst support for medium and high temperature catalytic reaction. Three-dimensional (3D) flow field structure is the most potential microchannel structure due to its high efficiency of mass and heat transfer . However, ceramic materials are hard and brittle, and the size of microchannel structures are small. It is a great challenge to construct a ceramic based microchannel catalyst support with a complex 3D flow field by traditional processing methods. In this paper, a 3D staggered flow field microchannel with the width of 450 μm and the depth of 1500 μm was designed and processed by diamond wire sawing. The mass and heat transfer properties of straight microchannel (SM), micro-column array (MA) and 3D staggered microchannel (3DSM) were compared by simulation. The effects of different windward angles (60°, 90° and 120°) on the performance of mass and heat transfer in 3D flow field were analyzed. The simulation results showed that the performance evaluation criteria ( PEC ) of 3DSM120° was 1.37, which meant better performance of heat and mass transfer than SM and MA. And the PEC of 3DSM structure was increased from 1.25 to 1.37 with the windward angle increasing from 60° to 120°. The pressure drop characteristics and hydrogen production performance of the microchannel catalyst support with different structures (SM, MA, 3DSM) were tested. The experimental results showed that the 3DSM had a good hydrogen production performance of methanol steam reforming (MSR) with the inlet flow rate of 1.5 ml/h at 300 °C. The methanol conversion rate was 99.43%, which was 15.41% and 6.20% higher than that of SM and MA, respectively, due to its better performance of mass and heat transfer.

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Direct ink writing of 3D SiC scaffold as catalyst support for thermally autonomous methanol steam reforming microreactor

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

A flow-through catalytic membrane micro-reactor for hydrogen production by methanol steam reforming

UV-Laser ablation enhanced Joule-heating catalyst support for electrified MSR in microreactor

Standalone ethanol micro-reformer integrated on silicon technology for onboard production of hydrogen-rich gas

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Hydrogen production in microreactor using porous SiC ceramic with a pore-in-pore hierarchical structure as catalyst support

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Efficient Low-temperature Hydrogen Production by Electrochemical-assisted Methanol Steam Reforming

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

A Joule-heated carbon nanofiber aerogel-supported catalyst for hydrogen production via methanol steam reforming

Development of ceramic-based 3D staggered microchannel catalyst support used in MSR microreactor for hydrogen production