UV-Laser ablation enhanced Joule-heating catalyst support for electrified MSR in microreactor

Xinying Li,Ding Yuan,Tian Xie,Quancong Zhang,Wenjun Xu,Ting Fu,Xuyang Chu,Tao Luo,Linjing Wu,Wei Zhou
DOI: https://doi.org/10.1016/j.cej.2023.141571
IF: 15.1
2023-02-03
Chemical Engineering Journal
Abstract:Methanol is a promising hydrogen carrier, where hydrogen-rich gas can be produced by methanol steam reforming (MSR). However, this method of releasing hydrogen is highly energy consuming. Herein, the Joule-heating catalyst support (JHCS) was fabricated by a FeCrAl metal to enhance the efficiency of electrification, replacing the conventional external heating method. The heat can be provided for the reforming reaction directly inside the microreactor by the Joule-heating method. The Joule-heating reactor showed a faster thermal response than the externally heated reactor; the start-up heating time and the time of a start-stop cycle are about 75 % and 50 % of those for external heating, respectively. The methanol conversion rate of the Joule-heating microreactor was 91.45 % at 280 °C, improved by nearly 30 % than the external heating counterpart. The consumed power density of the Joule-heating microreactor was 2 W/cm 3 , only 15.8 % of external heating (12.61 W/cm 3 ). The reforming efficiency reached 51.91 % without any waste heat recovery measures, about 4 times of the external heating method. Heat transfer simulation verified the minimal radial temperature gradient in the microreactor eliminated by JHCS. The proposed JHCS method demonstrates a uniform microreactor temperature distribution and superior hydrogen production performance with lower power consumption.
engineering, chemical, environmental
What problem does this paper attempt to address?