Abstract:This study established a zero-dimensional numerical model integrating methanol steam reforming (MSR) and high-temperature proton exchange membrane fuel cells (HT-PEMFC), systematically investigating the effects of parameters such as steam-methanol (S/C) ratio, reformer reaction temperature, methanol catalytic combustion ratio, fuel cell number, and anode stoichiometry on the thermal, mass, electrical, and efficiency performance parameters of the integrated system. The results confirmed that the integrated system can achieve thermal self-sustained operation without the need for additional heat from methanol catalytic combustion. Improved insulation quality enables the attainment of thermal self-sufficiency at lower operating conditions. The molar ratio of CO in the reformate increases with a decrease in the S/C ratio and an increase in the reformer reaction temperature. The system achieves maximum output power and efficiency when S/C equals 1.25 and the reformer temperature is 513 K, with increases of 8.6 % and 37.1 %, respectively. The system efficiency is highly sensitive to the anode stoichiometry of the fuel cell, showing an 11.7 % improvement as the stoichiometry decreases from 2.0 to 1.2. Based on these results, three improvement measures were proposed to enhance the performance of MSR and HT-PEMFC integrated systems: improving system insulation to lower thermal self-sufficiency conditions, optimizing the stoichiometry of the bipolar plates for significant efficiency improvement, and selecting appropriate operating parameters for system components to enhance overall performance. This study quantitatively demonstrates the potential of these measures to improve system performance, providing valuable insights for the design and optimization of integrated systems.

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Efficient Low-temperature Hydrogen Production by Electrochemical-assisted Methanol Steam Reforming

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Coupling of high-temperature proton exchange membrane fuel cells with methanol steam reforming: Modeling and simulation for an integrated coupled for power generation system

A review of reformed methanol-high temperature proton exchange membrane fuel cell systems

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Design and operation optimization of an on-site hydrogen production and purification integration system for PEMFC

A hybrid fuel cell system integrated with methanol steam reformer and methanation reactor

Hydrogen-rich gas with low-level CO produced with autothermal methanol reforming providing a real-time supply used to drive a kW-scale PEMFC system

High Temperature Polymer Electrolyte Membrane Fuel Cells for Integrated Fuel Cell – Methanol Reformer Power Systems: A Critical Review

H2 production with low carbon content via MSR in packed bed membrane reactors for high-temperature polymeric electrolyte membrane fuel cell

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Design, Fabrication and Performance Evaluation of an Integrated Reformed Methanol Fuel Cell for Portable Use

A flow-through catalytic membrane micro-reactor for hydrogen production by methanol steam reforming